SATO WS408DT Technical Manual page 72

4 SATO WS4 Printer Utility
Property Name
IP Address (IPv4)
Subnet Mask (IPv4)
Gateway (IPv4)
IP Address (Current IPv4)
Subnet Mask (Current IPv4)
Gateway (Current IPv4)
RSSI
Network Authentication
Description
The static IPv4 address of your printer.
The manually specified IPv4 subnet mask of
your printer.
The manually specified IPv4 gateway of your
printer.
The current IPv4 address of your printer.
The current IPv4 subnet mask of your printer.
The current IPv4 gateway of your printer.
Short for received signal strength indicator. It
measures your Wireless LAN signal strength.
The bigger the number, the stronger the signal.
Open It allows any device to authenticate to
an access point (AP) and gain access to a
network, but only the device with the correct
WEP key can receive encrypted data while the
AP uses WEP encryption.
WPA-Personal WPA-Personal uses
Pre-Shared Key (PSK) authentication, in which
all users use the same password to access a
network. WPA is designed to replace WEP. It
uses RC4 encryption as WEP, but provides
extra security through TKIP.
WPA2-Personal WPA2-Personal includes all
features of WPA-Personal, but it uses AES
encryption to enhance security.
802.1X 802.1X is an IEEE standard that
provides EAP-based authentication methods
for network access control. It enhances
security by centralizing user identification,
authentication and key management.
WPA-Enterprise WPA-Enterprise offers
centralized control over a network. It requires
an 802.1X authentication server (RADIUS
server) to validate users. Each user needs to
enter individual username and password to
access a network. It uses TKIP and RC4
algorithm to encrypt data.
68
Work with SATO WS4 Printer Utility