Specifications; Printer - SATO WS408DT Technical Manual

8 Specifications

8 Specifications
This chapter provides specifications of your printer.
change without notice.

8.1 Printer

Model
Print method
Resolution
Media Alignment
Operation Mode
Sensor
Print Speed
Print Darkness
Max Printable
Area
Non-Printable
Area
Print Ratio
Interface
Optional Interface
Accessories
CPU
WS408DT
203 dpi (8 dots/mm)
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode, Dispenser mode
Media Sensor: Gap Sensor (Transmissive, Fixed)
2, 3, 4, 5, 6 inches/sec
(50.8, 76.2, 101.6, 127, 152.4
mm/sec)
2 &3 ips for peel off mode
Darkness level – SBPL: 1~5
Length 999 mm x Width 104
mm
Pitch Direction - Top: 1.5 mm, Bottom: 1.5 mm (excluding liner)
Width Direction - Left: 1.5 mm, Right: 1.5 mm (excluding liner)
Average print ratio within 15 % or less (whole print layout
Full width with 1 mm pitch is required
STD Model: USB (Type A and Type B), Ethernet, RS232C
LAN Model: USB (Type A and Type B), Ethernet
Wireless LAN, Bluetooth
Dispenser, Full Cutter, External Unwinder
104
Specifications are subject to
Direct Thermal
300 dpi (12 dots/mm)
Centered
I-Mark Sensor (Reflective, Movable)
Head Open Switch
2, 3, 4 inches/sec
(50.8, 76.2, 101.6 mm/sec)
2 &3 ips for peel off mode
Default – SBPL: 3
Length 999 mm x Width
area)
32bit RISC
Printer
WS412DT
104 mm