SATO WS408DT Technical Manual page 55

4 SATO WS4 Printer Utility
Property Name
Sensor Type
Ribbon Sensor
Feed Key
Head Check
(Power on)
Auto Calibration
Description
It is the media sensor you are using. It includes I-MARK,
GAP and None. When you perform media calibration, the
sensor is set to the one you select.
Thermal Transfer Your printer uses the ribbon sensor to
detect the ribbon, it is mean Thermal Transfer (TT).
Direct Thermal Disable the ribbon sensor, it is mean
Direct Thermal (DT).
It defines the action of the FEED button.
Feed Your printer feeds a blank label each time the
button is pressed.
Reprint Your printer reprints the last label each time the
button is pressed.
Enable Your printer checks broken pins on the printhead
automatically once your printer is turned on.
Disable Disable the auto head check.
ON (Power on) Your printer automatically calibrates
media using a media sensor once it restarts or is turned on.
ON (Head close) Your printer automatically calibrates
media using a media sensor every time you close the print
module when the printer is turned on.
51
Work with SATO WS4 Printer Utility