Specifications; Printer - SATO Argox D2-250 User Manual

7 Specifications

7 Specifications
This chapter provides specifications for the printer.
to change without notice.

7.1 Printer

Model
Print method
Resolution
Media Alignment
Operation Mode
Sensor
Operation interface
Print Speed
Printable Area
Print Ratio
Interface
Programming
Language
Accessories
On-Board Memory
D2-250
203 dpi (8 dots/mm)
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode, Peeler mode
Reflective Sensor (Movable)
Media Transmissive sensor x 1 (fixed, 6.27mm offset)
LED indicator x 2, Button x 1
2, 3, 4, 5, 6, 7 inches/sec
(50.8, 76.2, 101.6, 127, 152.4,
177.8 mm/sec)
2 &3ips for peel off mode
Max. length 100"
Average print ratio within 15 % or less (whole print layout area)
Full width with 1mm pitch is required
USB hosts(Type A), USB device(Type B)
Optional: RS-232, Ethernet ,Wi-Fi(IEEE 802.11b/g/n),
Peeler, Full Cutter, External Media Stand
Standard Memory (Flash ROM): 16 MB
Standard Memory (SDRAM): 32 MB
USB storage up to 32 GB (FAT32 format only)
57
Specifications are subject
Direct Thermal
300 dpi (12 dots/mm)
Centered
Head Open Switch
2, 3, 4, 5 inches/sec
(50.8, 76.2, 101.6, 127
2 &3ips for peel off mode
Bluetooth V4.2
PPLA+PPLB+PPLZ
User Memory: 8 MB
D2-350
mm/sec)
Max. length 50"