Settings With The Utility Package (Gx Configurator-Sc) - Mitsubishi Electric QJ71C24N User Manual

4 SETTINGS AND PROCEDURES PRIOR TO OPERATION

4.6 Settings with the Utility Package (GX Configurator-SC)

4 - 23
The settings defined with GX Configurator-SC for operation of the Q series C24 are
described in Chapter 8.
The following concerns the data set from GX Configurator-SC.
1) Data set in the Q series C24 for the use of specific functions
2) Data set in the programmable controller CPU to communicate information between
the Q series C24 and the programmable controller CPU of the mounting station.
This section explains the "Auto refresh settings" of the data mentioned in 2) above.
[Setting purpose]
The auto refresh settings are defined to automatically store the information stored
in the buffer memory of the Q series C24 in devices designated by the
programmable controller CPU.
By this setting, the users can see the module information without accessing the
Q series C24.
[Setup procedure]
[Tools] [Intelligent function utility]
function module" screen
For display screen, see Section 9.3.
[Setting screen]
[Start] "Select a target intelligent
Auto refresh .
MELSEC-Q
4 - 23