Mitsubishi Electric QJ71C24N User Manual page 377

APPENDICES
Screen
Accumulated count of unlock process normal
completion
Accumulated count of unlock process abnormal
completion
Accumulated count of lock process based on circuit
disconnect
Modem function
Callback permit accumulated count
monitor/test
Callback denial accumulated count
Auto (callback) connection permit accumulated count
Auto (callback) connection denial accumulated count
Accumulated count of callback receive procedure
cancel
Circuit disconnect wait time (PLC CPU watch use)
Remote password mismatch notification count
designation
Remote password mismatch notification accumulated
count designation
Modem function
Auto modem initialization designation
system setting
Callback function designation
Callback denial notification accumulated count
designation
Data No. for callback designation 1 to 10
Transmission
control and other RS-232 control signal status CS (CTS)
monitoring/tests
RTS (RS) designation
DTR (ER) designation
Transmission control start free area
Transmission control end free area
Send/Recv data monitoring designation
Transmission
Action for buffer full
control and
other system Stop by Timer 0 error
settings
Monitor buffer head address
Monitor buffer size
Transmission transparent code designation (2nd to
10th)
Echo back enable/disable setting (for RS-422/485 I/F)
Non procedure
User frame receive format designation (1st to 4th)
system setting
Exclusive format-1 received data count (1st to 4th)
Non procedure
Timeout at No-protocol
monitor/test
App. - 4
(2) List of added setting items for GX Configurator-SC
The following table lists the setting items added to GX Configurator-SC due to a
software version upgrade.
Additional setting item
Software version
Ver. 2 Ver. 1
20W 11M 06G 00A
MELSEC-Q
SW0D5C-
QSCU-E Reference
section
40E,
10B,
10L 30D,
00A
20C
Section
9.4.4
Section
9.6.2
Section
9.4.5
Section
9.6.3
Section
3.3.4
Section
9.4.7
Section
9.6.5
App. - 4