Monitor/Test - Mitsubishi Electric QJ71C24N User Manual

9 UTILITY PACKAGE (GX Configurator-SC)

9.6 Monitor/Test

9 - 36
[Purpose]
The displayed menu screen is used to perform various operations, including the
monitoring of the Q series C24's operating status and setting values and the
testing of its output signals. The monitor/test operations can be performed only
via online operation.
[Operating procedure]
Startup from Intelligent function module utility
(GX Developer Version 4 or later)
[Online] [Monitor/Test]
Monitor/Test
[Monitor] screen
Startup from the system monitor (GX Developer Version 6 or later).
[GX Developer]
series C24 by installation status"
[Monitor/Test screen]
[Monitor/Test items]
The following selection menus for monitor/test operation will be displayed.
ERR. occurrence
ERR. clear request
(Communication error information, error code information)
X/Y monitor/test
Modem function monitor/test
Transmission control and others monitor/test
MC protocol monitor
Non procedure monitor/test
Bidirectional monitor
Pre-defined protocol monitor/test
PLC CPU monitoring monitor
Transmission user frame No. designation monitor
Monitor/test others
System setting default, system setting write
Flash ROM write allow/prohibit designation
"Select monitor/Test module"
[Diagnostics] [System Monitor]
Diagnostics...
Function
MELSEC-Q
"Select the Q
[Monitor] screen
Reference section containing
explanation
Section 9.6.11
Section 9.6.1
Section 9.6.2
Section 9.6.3
Section 9.6.4
Section 9.6.5
Section 9.6.6
Section 9.6.7
Section 9.6.8
Section 9.6.9
Section 9.6.10
Section 9.4.12
Section 9.4.13
9 - 36