Table of Contents
Advertisement
9
UTILITY PACKAGE (GX Configurator-SC)
1) When using online operation
Select [Online] – [Monitor/Test] from the menu bar.
Select monitor/test module screen
Monitor/Test
Select a module to be monitored/tested.
Monitor/Test screen
See Section 9.4
See Section 9.6
9 - 10
POINT
(1) When the setting operation is complete in each system setting screen, register
the system setting data in the flash ROM, then restart the programmable
controller CPU to resume data transmission.
(2) With the Q series C24, monitoring, testing, and reading/writing of setting
values can be performed via online operation.
2) When setting auto refresh
Auto refresh
Enter "Start I/O No.", and select "Module type"
and "Module model name".
Auto refresh setting screen
See Screen 4.6
MELSEC-Q
9 - 10
Advertisement
Table of Contents
Troubleshooting
