Table of Contents
Advertisement
APPENDICES
App. - 3
: Usable
: Usable (Model serial no. limited)
: Usable
1 There is restriction on serial no. of the Q series C24 or programmable controller
CPU that can use the function.
For version verification, see section 2.7.
2 The data reception using format-0 refers to the method of receiving data by user
frame, which was supported in the Q series C24 of function version A.
3 The Q series C24 of function version A is capable of setting one pair of
transparent code and additional code per interface for both transmission and
reception.
4 This function can be used when connecting with GX Developer.
5 This function is available in GX Developer Version 6 or later.
6 GX Developer can only be connected to the CH1 side in case of the Q series C24
of function version A.
It is not possible to connect both GX Developer and the GOT to the two interfaces
at the same time.
MELSEC-Q
App. - 3
Advertisement
Table of Contents
Troubleshooting
