Using the Operator Panel
1.2.2
Using the Menu Selection System
Printing the Menu Map
This section explains the procedure for using the menu selection system.
The menu selection system is activated by the MENU key while the printer
is Ready.
The printer produces a full list of the menu selection system. Note that
menus indicated on the list may vary depending on which optional units
are installed in the printer.
1
Press the MENU key.
2
Press the
or
Print
Menu Map
3
Press the ENTER key. A question mark (?) appears.
Print
Menu Map ?
If you want to abandon this operation, press the CANCEL key.
4
Press the ENTER key again. The printer prints a menu map.
key until Print Menu Map appears.
1-12