Using The Operator Panel; Menu Selection System - Kyocera Mita FS-1050 Operation Manual

Using the Operator Panel

1.2 Using the Operator Panel
1.2.1

Menu Selection System

This section explains how to use the menu selection system. The MENU key
on the operator panel allows you to use the menu to set or change the
printer default settings such as the default number of copies, emulation,
etc., to match your specific needs. Settings can be made when Ready is
indicated on the printer message display.
The printer applies the most recent printer settings sent from the
application software or from the printer driver. These take priority over
operator panel settings.
Note
The following is the flowchart of the menu selection system of the printer.
Vertical movement between menus is made with the
horizontal movement is made with the > and < keys. To change or confirm
settings of items, use the ENTER key.
Ready
PAR A4 PLAIN
MENU
Print
Menu Map
Print
Status Page
Continued on next page
1-6
and keys and