Table of Contents
Advertisement
Using the Operator Panel
Option
Printing a Network Interface Card Status Page
To use this function, the optional network interface card must be
installed in the printer.
You can print a network interface card status page each time the printer
prints the status page. The network interface card status page shows the
firmware version, the network addresses and other information under
various network protocols about the network interface card. The default is
Off (print).
Printing out a network interface card status page may not be possible
with some network interface cards. For details, see your network
interface card manual.
Note
1
Press the MENU key.
2
Press the
Interface
Parallel
3
Press the ENTER key. A blinking question mark (?) appears.
Interface
? Parallel
If you want to abandon this procedure, press the CANCEL key. The
interface remains unchanged.
4
Press the
Interface
? Option
5
Press the ENTER key again. A > appears.
Interface
Option
or
key until Interface > appears.
>
or
key until Option appears.
>
1-24
Advertisement
Table of Contents
