Table of Contents
Advertisement
Message
Message
Message
Message
Load MP tray
(paper size)/(paper type)*
*(paper size) and (paper
type) are displayed flashing
alternately.
Paper jam
############
Paper path error
Replace toner
TK-17
Set paper
Press GO
Toner low
TK-17
Warning
image adapt
Warning
low memory
Warning waste
toner box
The ATTENTION indicator turns on and and the READY indicator flashes. There is
no paper cassette set (paper size, paper type) that matches with the data for printing,
so printing is done from the MP tray. Set paper into the MP tray that matches the
paper size and type shown on the display and press the GO key to restart printing.
Or, if you want to print from a different paper source press the
Use alternative? and you can change the source for paper feeding.
After selecting a paper source and pressing the MENU key, Paper Handling >
appears. By pressing the > key, the paper type settings menu appears. After setting
the correct paper type, press the ENTER key and printing starts.
Note : Feeding the paper having a paper size which does not match the current paper
Note : Feeding the paper having a paper size which does not match the current paper
Note : Feeding the paper having a paper size which does not match the current paper
Note : Feeding the paper having a paper size which does not match the current paper
size from the MP tray can cause paper jam.
size from the MP tray can cause paper jam.
size from the MP tray can cause paper jam.
size from the MP tray can cause paper jam.
The ATTENTION indicator turns on and the READY indicator goes off. Indicates that
paper is jammed in the printer. The location of the paper jam is also indicated in place
of the #'s. Open the top and/or front cover and pull out the jammed or misfed paper.
The ATTENTION indicator turns on. There is no paper cassette in the feeder, or the
cassette is not inserted properly. After reinserting the paper cassette, you should be
able to print.
The ATTENTION indicator turns on and the READY indicator goes off. Indicates that
the printer has stopped because toner has run out. Replace the toner container with
a new one. Clean the printer after replacement.
The ATTENTION indicator turns on and the READY indicator flashes. Indicates
there is no paper in the MP tray. Add paper to the tray. Press the GO key to resume
printing.
Note : Feeding the paper having a paper size which does not match the current paper
Note : Feeding the paper having a paper size which does not match the current paper
Note : Feeding the paper having a paper size which does not match the current paper
Note : Feeding the paper having a paper size which does not match the current paper
size from the MP tray can cause paper jam.
size from the MP tray can cause paper jam.
size from the MP tray can cause paper jam.
size from the MP tray can cause paper jam.
The ATTENTION indicator flashes. Indicates that toner is running out. Replace the
toner container with a new one. Clean the printer after replacement.
The ATTENTION indicator flashes. Indicates that the print job cannot be done at
current resolution because there is not enough internal memory. Try adding memory
or changing resolution.
The ATTENTION indicator flashes. Indicates that the printer's memory is running
low because of the number of downloaded fonts and macros. Print a status page to see
how much user memory is left and try deleting unnecessary fonts and macros.
The ATTENTION indicator flashes. The waste toner reservoir in the process unit is
almost full. The waste toner reservoir will become full and the printer will stop
printing. Contact your Kyocera Mita dealer.
Corrective Action
Corrective Action
Corrective Action
Corrective Action
4-8
Indicators and Messages
or
key to display
Advertisement
Table of Contents
