Indicators And Messages; Indicators - Kyocera Mita FS-1050 Operation Manual

4.3

Indicators and Messages

4.3.1

Indicators

Indicator Indicator Indicator Indicator Name Name Name Name
READY
READY
indicator
DATA
DATA
indicator
ATTENTION
ATTENTION
indicator
The following tables contain information about how to respond to problems
indicated by the operator panel indicators and messages.
Condition Condition Condition Condition
Flashing Indicates errors that you can correct yourself.
Lit Indicates that the printer is online and ready.
Off Indicates that the printer is offline. The printer can receive data, but
will not print it. This can also signal that printing has been
manually or automatically stopped due to an error. Check the
ATTENTION indicator.
Flashing Indicates a data transfer in process.
Lit Indicates either that data is being processed, or that data is being
written to the memory card.
Off Indicates that the printer is idle.
Flashing Indicates that paper has run out, that memory is insufficient, that
toner is low or other warning messages.
Lit Indicates common errors (such as controller errors), when
mechanical maintenance is needed or indicates a problem that
requires a call to the service center.
Off Indicates the printer is operating normally.
Description Description Description Description
4-6
Indicators and Messages