Kyocera Mita FS-1050 Operation Manual page 72

Using the Operator Panel
Setting the Cassette Size
After setting the paper into the paper cassette, you should set the cassette
size as follows. The default factory setting is A4.
About the paper cassette, and the adjustment of the paper guides and
paper stopper inside the paper cassette, see the
with the printer.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
4
Press the or
>Cassette Size
A4
5
Press the ENTER key. A blinking question mark (?) appears.
>Cassette Size
? A4
6
Press the or
display changes as shown below.
A4
Letter
Legal
Custom
A5
B5
If you want to abandon the selection, press the CANCEL key.
7
When the desired cassette size is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key until Paper Handling > appears.
key until >Cassette Size appears.
key to display the desired cassette size. The
1-62
Installation Guide Installation Guide
Installation Guide Installation Guide supplied