Kyocera Mita FS-1050 Operation Manual page 147

Table of Contents

Advertisement

Print Quality Problems
4.2
Print Quality Problems
Printed Results
Printed Results
Printed Results
Printed Results
All-black printout
Dropouts, horizontal streaks, stray dots
Black or white vertical streaks
The following table contains various possible corrective measures for print
quality problems, such as streaks. The troubleshooting procedure for each
type of problem is outlined below. If the problem(s) persist, contact your
Kyocera Mita dealer.
Corrective Measures
Corrective Measures
Corrective Measures
Corrective Measures
Contact your Kyocera Mita dealer.
Contact your Kyocera Mita dealer.
Contact your Kyocera Mita dealer.
Contact your Kyocera Mita dealer.
Clean the charger wire.
Clean the charger wire.
Clean the charger wire.
Clean the charger wire.
Open the top and front covers of the printer. Remove the
process unit form the printer and slide the charger
cleaner knob back and forth a few times. See section
Cleaning
Cleaning
3-6
3-6
Cleaning
Cleaning
on page
3-6
3-6
Check the operator panel.
Check the operator panel.
Check the operator panel.
Check the operator panel.
If the Toner low TK-17 message appears and the
ATTENTION indicator flashes, install a new toner kit. See
3.1 Toner Container Replacement
3.1 Toner Container Replacement
section
3.1 Toner Container Replacement
3.1 Toner Container Replacement
Clean the charger wire.
Clean the charger wire.
Clean the charger wire.
Clean the charger wire.
Open the top and front covers of the printer. Remove the
process unit form the printer and slide the charger
cleaner knob back and forth a few times. See section
Cleaning
Cleaning
Cleaning
Cleaning
on page
3-6
3-6
3-6
3-6
Check the position of the charger cleaner knob
Check the position of the charger cleaner knob
Check the position of the charger cleaner knob
Check the position of the charger cleaner knob
Open the printer top and front covers. Remove the process
unit from the printer. Make sure that the charger cleaner
knob is restored to its home position. See section
Cleaning
Cleaning
Cleaning
Cleaning
3-6
3-6
3-6
3-6
on page
4-3
.
on page
.
.
(Continued on next page)
3.2
3.2
3.2
3.2
3-2
3-2
3-2
3-2
.
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2

Advertisement

Table of Contents
loading

Table of Contents