Using Page Set Menus - Kyocera Mita FS-1050 Operation Manual

Using the Operator Panel

Using Page Set Menus

In the Page Set menus, you can change the number of copies, the page
orientation and other settings that have to do with pages.
Changing the Number of Copies
You can change the number of copies to be printed for the current interface.
The number of copies can be set between 1 and 999. You can change this
number whenever the message display indicates Ready.
1
Press the MENU key.
2
Press the or
Page Set
3
Press the > key.
4
Press the or
>Copies
5
Press the ENTER key. A blinking cursor (_) appears.
>Copies
6
Press the or
cursor is blinking. It can be set between 1 and 999. You can use the >
and < keys to move the cursor right and left.
If you want to abandon this procedure, press the CANCEL key.
7
When the desired value is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key until Page Set > appears.
>
key until >Copies appears.
001
001
key to increase or decrease the value where the
1-38