Kyocera Mita FS-1050 Operation Manual page 82

Using the Operator Panel
Envelope
Cardstock
7
When the desired paper type to set the print density is displayed,
press the ENTER key.
8
Press the > key.
9
Press the or
>>Print Density
03
10
Press the ENTER key. A blinking question mark (?) appears.
>>Print Density
? 03
11
Select the print density from five steps from 01 (light) to 05 (dark)
using the or
If you want to abandon this procedure, press the CANCEL key.
12
Press the ENTER key.
13
Press the MENU key. The message display returns to Ready.
key until >>Print Density appears.
key.
1-72