Table of Contents
Advertisement
Glossary
Cassette mode
This is an operation mode for the MP tray. When
this mode is used, approximately 50 sheets of
plain paper can be fed continuously, the same as
for the cassette.
dpi (dots per inch)
This indicates the number of dots printed per
inch, and is the unit of printer resolution.
EcoPrint
This is a printing mode that controls toner
consumption. Pages printed in the EcoPrint
mode are lighter than pages printed in the
normal mode. The default setting is Off.
Emulation
This refers to emulation of manufacturers'
printers. The printer emulates operation of the
following printers: PCL, Line printer, IBM
Proprinter, DIABLO 630, EPSON LQ-850,
KPDL.
Expansion memory
This option is used to increase printer memory.
The printer has one expansion slot, and you can
install a 16 MB, 32 MB, 64 MB, or 128 MB
DIMM (Dual Inline Memory Module). Contact
your Kyocera Mita dealer to purchase the DIMM
that is best suited for use with this printer.
Face-up tray
This is located at the rear of the printer. Select
paper output to the face-up tray when printing
on postcards, envelopes, or labels.
First mode
This is an operation mode for the MP tray. When
the MP tray setting is set to first mode (priority
printing from the MP tray) with paper inserted in
the MP tray, the first paper will always feed from
there even if another paper source is selected. The
printer is set to the cassette mode (another MP
tray operation mode) as the factory default, but
you can change this setting from the operator
panel.
IEEE1284
This is a standard used when connecting a
printer to a computer, and was established by the
Institute of Electrical and Electronic Engineers
in 1994.
KIR (Kyocera Image Refinement)
This is Kyocera Mita's original smoothing
function. It uses software to enhance the
printer's resolution and produce high-quality
printing. The default setting is On.
KM-NET VIEWER
This is a network management tool that can be
used with the printer. You can view information
for printers connected to the network using
SNMP commands. KM-NET VIEWER is contained
on the Kyocera Mita Digital Library CD-ROM
supplied with the printer.
KPDL
(Kyocera Printer Description
Language)
This is Kyocera Mita's version of Adobe
PostScript 2.
Kyocera Mita Digital Library
This is the CD-ROM supplied with the printer.
The contents of the CD-ROM include manuals,
printer drivers, and various utilities.
MB (mega byte)
This unit is used to express data quantities and
memory capacities. 1 MB is equivalent to
1024 kB, or 1,048,576 bytes.
E-2
Advertisement
Table of Contents
