Kyocera Mita FS-1050 Operation Manual page 73

Setting the Custom Paper Size
In addition to the standard A5, A4, B5, Letter and Legal sizes for the paper
cassette, paper of other sizes can be used as custom sizes. When placing
paper of sizes other than A5, A4, B5, Letter or Legal size into the paper
cassette, set the custom size of the paper to be used by following the
procedure given below.
Properly set the paper into the paper cassette. For details about the
adjustment of the paper guides and paper stopper inside the paper
Installation Guide Installation Guide Installation Guide Installation Guide
cassette, see the
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
4
Press the or
If an option paper feeder is added, >Cassette 1 Size will appear
for the standard paper cassette and >Cassette 2 Size will appear
for the option paper feeder.
>Cassette Size
A4
5
Press the ENTER key. A blinking question mark (?) appears.
>Cassette Size
? A4
6
Press the or
>Cassette Size
? Custom
7
Press the ENTER key.
supplied with the printer.
key until Paper Handling > appears.
key until >Cassette Size appears.
key until Custom appears.
1-63
Using the Operator Panel