Kyocera Mita FS-1050 Operation Manual page 78

Using the Operator Panel
3
Press the > key.
4
Press the or
>Override A4/LT
Off
5
Press the ENTER key. A blinking question mark (?) appears.
>Override A4/LT
? Off
6
Select On or Off using the
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
Customizing the Paper Type
The following describes the procedure used to set a user-defined paper type
for the printer. Eight custom user settings may be registered. After having
been set, any of them may be called up when setting the paper type for a
paper source.
The paper weight and print density can be set (see
Weight Weight 1-70 1-70
Weight Weight on page 1-70 1-70 , and
selecting the paper type to be customized as follows. For how to reset the
customized settings, see
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the > key.
key until >Override A4/LT appears.
or
Adjusting the Print Density Adjusting the Print Density
Adjusting the Print Density Adjusting the Print Density
Resetting the Type Adjust Resetting the Type Adjust Resetting the Type Adjust Resetting the Type Adjust
key until Paper Handling > appears.
1-68
key.
Setting the Paper Setting the Paper
Setting the Paper Setting the Paper
on page
1-73 1-73 1-73 1-73
on page
1-71 1-71
1-71 1-71 ) after
.