Table of Contents
Advertisement
Sleep Timer Setting
The printer has a sleep timer that allows to conserve power when it is not
printing, processing or receiving data. You can adjust the timer; in other
words, you can set the length of time before the printer enters sleep mode
when it is idle. The default is 5 minutes.
1
Press the MENU key.
2
Press the
or
Others
3
Press the > key.
4
Press the
or
setting is 005 min.
>Sleep Timer
005 min.
5
Press the ENTER key. A blinking cursor (_) appears.
>Sleep Timer
005 min.
6
Press the
or
cursor is blinking and set the desired time. The timer can be set
between 5 and 240 min., in 5-minute increments. You can use the >
and < keys to move the cursor right and left.
If you want to abandon this procedure, press the CANCEL key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
key until Others > appears.
>
key until >Sleep Timer > appears. The default
>
key to increase or decrease the value where the
1-79
Using the Operator Panel
Advertisement
Table of Contents
