Table of Contents
Advertisement
Using the Operator Panel
6
Press the ENTER key. A blinking cursor (_) appears.
>>Size
012.00 point(s)
7
Press the
or
cursor is blinking. The font size can be set between 4 and 999.75
points, in 0.25-point increments. You can use the > or < key to move
the cursor right and left.
If you want to abandon this procedure, press the CANCEL key.
8
When the desired size is displayed, press the ENTER key.
9
Press the MENU key. The message display returns to Ready.
Changing the Character Pitch for Courier/Letter Gothic
You can change the character pitch for fixed fonts when the default font is
Courier or Letter Gothic.
1
Press the MENU key.
2
Press the
or
Font
3
Press the > key. Press the
appears.
>Font Select
Internal
4
Make sure that Internal is displayed and press the > key.
5
Press the
or
>>Pitch
10.00 cpi
key to increase or decrease the value where the
key until Font > appears.
>
or
>
key until >>Pitch appears.
1-34
key until > Font Select >
Advertisement
Table of Contents
