Table of Contents
Advertisement
Selecting the Default Font
You can select the font to be used by default with the current interface. In
addition to the internal fonts, all fonts downloaded to the printer memory,
the memory card or optional ROM can be selected as the default font.
From this menu, you can also select the type and pitch for Courier and
Letter Gothic, the size of the default font, as well as print a font list.
Selecting the default font
1
Press the MENU key.
2
Press the
or
Font
3
Press the > key. Press the
appears.
>Font Select
Internal
4
To select an internal font, make sure that Internal is displayed and
press the > key. The message display changes as shown below. If
Internal is not displayed, press the
>> I000
To select an option font, press the ENTER key while > Font Select
> is displayed. Press
Option and press the ENTER key. Pressing the > key after that
displays the font selection shown above. This operation is possible
only when option fonts are installed in the printer.
The letter before the number indicates the type of font as shown
below:
Letter
Letter
Description
Description
Letter
Letter
Description
Description
Internal font
I
Soft (downloaded) font
S
Fonts in a memory card
M
Fonts in a RAM disk.
H
Fonts in an optional ROM
O
key until Font > appears.
>
or
>
or
key until the message display indicates
1-31
Using the Operator Panel
key until > Font Select >
or
key to display it.
Advertisement
Table of Contents
