Memory (Compactflash) Card - Kyocera Mita FS-1050 Operation Manual

B.3

Memory (CompactFlash) Card

Insert the memory (CF) card into the card slot located on the rear of the
printer. A memory card is a microchip card that may contain option fonts,
macros, forms, etc. The printer reads the contents of the card into its
internal memory when printer is turned on. The presence of this data in
the printer memory can be confirmed on the status page printout.
For details of available memory cards, contact your Kyocera Mita dealer.
1
Turn off the printer.
Never insert or remove a memory card while the printer power is on.
Failure to turn the power switch off will immediately halt the printer with
a Memory card err20 message (this message may not always appear).
Note
It also could result in any damage to the printer's electronic parts or the
memory card. Turn the power switch on again to restart the printer.
2
Remove the two screws from the option interface slot cover and
remove the slot cover.
Option Interface Slot Cover
Screws
B-8
Memory (CompactFlash) Card