Table of Contents
Advertisement
CDM-550T Satellite Modem
KST-2000A FSK Remote Operation
1.2.3
(ODU,ENABLE)
The user is prompted to select 1 of 3 sub-menu branches using the [←] [→] keys,
then press <ENTER>.
1.2.4
(ODU,ENABLE)
The user uses this menu item to select either the 'Transmitter configuration
branch", "Receiver configuration branch" or "Misc configuration branch". Use the
[←] [→] keys, then press <ENTER>.
1.2.5
(ODU,ENABLE,CONFIG)
This menu item is used to select which ODU Transmitter parameter is to be
modified. Use the [←] [→] keys, then press <ENTER>.
1.2.6
(ODU,ENABLE,CONFIG,TRANSMITTER)
The user is prompted to edit the transmit frequency. This is accomplished by
selecting the digit to be edited, using the [←] [→] keys. The value of the digit is
then changed using the [↑] [↓] keys. The user may then press <ENTER>.
The frequency limits of the KST-2000A are known and the frequency values are
constrained accordingly.
Selections
ODU SELECT: CONFIG
STATUS
(ENTER)
CONFIG (Configuration)
ODU CONFIG: TRANSMITTER
RECEIVER MISC (ENTER)
ODU TX: FREQUENCY
OUTPUT
HPA
(ENTER)
EDIT ODU TX FREQUENCY:
14500.0 MHz (PRESS ENT)
4
INFO
TRANSMITTER
ATTEN
FREQUENCY
Revision 0
MN/CDM550T.AA1
MN/CDM550T.AA1
Advertisement
Chapters
Table of Contents
