Usb Settings; Configuring Usb Settings - Xerox WorkCentre 7800 series Administrator's Manual

Network Connectivity

USB Settings

USB Settings allow you to set the USB connection mode and the print timeout value.

Configuring USB Settings

®
1. In Xerox CentreWare
For Hardware Ports, next to USB Settings, click Edit.
2.
3. For USB Connection Mode, select an option:
Software Tools: This option disables Direct Printing via Driver. If you use Xerox
−
Assistant, select this option. Xerox representatives also use this feature to connect directly to
the printer and use diagnostic software and other utilities.
− Direct Printing via Driver: This option allows you to connect to the printer using a USB cable.
4. For Print Timeout, type the amount of time in seconds that the printer waits inactive before it
disconnects from a device that is connected to the port. Type 0 to disable the timeout.
Click Save.
5.
®
38 Xerox WorkCentre
System Administrator Guide
®
Internet Services, click Properties > Connectivity > Setup.
®
7800/7800i Series Color Multifunction Printer
®
Copier