Configuring Snmpv1/V2C - Xerox WorkCentre 7800 series Administrator's Manual

Configuring SNMPv1/v2c

SNMP version 1 (SNMPv1) is the initial implementation of the SNMP protocol. SNMPv1 operates over
protocols such as User Datagram Protocol (UDP), IP, and Novell Internet Packet Exchange (IPX).
SNMPv2c includes improvements in performance, confidentiality, and manager-to-manager
communications over SNMPv1, however it uses the simple-community based security scheme of
SNMPv1.
®
1. In Xerox CentreWare
2. Under Protocol, next to SNMP, click Edit.
3. Click Edit SNMPv1/v2c Properties.
4. Under GET Community Name, type a name.
GET returns the password for the SNMP GET requests to the printer. Applications obtaining
information from the printer using SNMP, such as Xerox
password.
5. Under SET Community Name, type a name.
SET returns the password for the SNMP SET requests to the printer. Applications that set
information on the printer using SNMP use this password.
CAUTION:
Changes made to the GET or SET community names for this printer require corresponding
changes to the GET or SET community names for applications using SNMP.
6. Under TRAP Community Name, type a name.
Note: Use the Default TRAP Community Name to specify the default community name for all traps
the printer generates. Individual Trap Community Names specified for each trap destination
address can override the community name. Each Trap Community Name must be unique.
Click Save to apply the new settings or Undo to retain the previous settings.
7.
®
Internet Services, click Properties > Connectivity > Setup.
®
Xerox WorkCentre
® ®
CentreWare Internet Services, use this
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Network Connectivity
67