Connecting To A Wireless Network - Xerox WorkCentre 7800 series Administrator's Manual

Network Connectivity

Connecting to a Wireless Network

If the printer is connected to your wired network, you can configure wireless settings in Xerox
®
CentreWare Internet Services.
Note: You cannot connect to a wired network and a wireless network at the same time.
Before you begin, purchase and install the Xerox
®
1. In Xerox CentreWare
®
Wireless Network Interface, click Edit.
2. Next to Xerox
Note: The Edit button is available after you install the Xerox
3. To configure IPv4, IPv6, and DNS settings, on the Wireless Profile page, next to IP, click Edit.
Configure settings as needed, then click Apply. The printer uses separate IP settings for wired and
wireless network connections. For details, see
4. On the Wireless Profile page, next to Wireless Settings, click Edit.
5. On the Wireless Settings page, click Scan for Available Networks. A list of detected networks
appears.
6. Next to the SSID name of the network you want to join, click Configure and Select.
7. The printer detects the security mode that your network uses. Configure the following security mode
settings as needed:
− Under WEP Setting and Key, select the bit strength and key.
− Under Encryption Algorithm, select an encryption method. Auto automatically detects the
algorithm that your wireless network uses.
− Under Authentication Method, select the authentication method that your wireless network
uses.
− To require the printer to validate certificates, under Server Validation, select the certificate that
you want to use. Install the validation server root certificate on the Security Certificates page
at Properties > Security > Security Certificates. For details, see
113.
− Under Device Certificate (TLS) - Authentication Certificate, select the device certificate that
you want to use. Install the device certificate on the Security Certificates page at Properties >
Security > Security Certificates. For details, see
− Under Outer Identity, configure the external User ID.
− Under User Name, type the user name that the printer uses to access the wireless network.
− Under Password, type and confirm a password. Click Select to save new password as needed.
®
32 Xerox WorkCentre
System Administrator Guide
®
Internet Services, click Properties > Connectivity > Setup.
®
7800/7800i Series Color Multifunction Printer
®
Wireless Network Interface.
®
Wireless Network Interface.
IP on page 43.
Security Certificates
®
Security Certificates on page
on page 113.