Managing Actions; Managing Protocol Groups - Xerox WorkCentre 7800 series Administrator's Manual

Managing Actions

Use actions to more specifically manage how IPsec controls dependent protocols.

Managing Protocol Groups

Protocol Groups are logical groupings of selected protocols based on service type, service name, port
number, and device type. Create a Protocol Group to apply specific security policies for selected
protocols.
Creating a New Protocol Group
1. Click Protocol Groups at the top of the IPsec page.
Click Add New Protocol Group.
2.
3. Type a Name and a Description for the group.
4. Under Service Name, select the protocols that you want to add to the group.
5. To control a service that is not listed, under Custom Protocols type a name for the service and select
the check box under Service Name.
6. To control a service that is not listed, under Custom Protocols type a name for the service and select
the check box under Service Name.
Select TCP or UDP from the Protocol list.
7.
8. Type the port number, and specify if the printer is the server or client.
9. Click Save to apply the new settings or Undo to retain the previous settings. Click Cancel to return
to the previous page.
Editing or Deleting a Protocol Group
To edit or delete a protocol group, select the protocol group from the list, and click Edit or Delete.
® ®
Xerox WorkCentre 7800/7800i Series Color Multifunction Printer
System Administrator Guide
Security
109