Xerox WorkCentre 5790 Family Service Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. All in One Printer
  5. WorkCentre 5790 Family
  6. Service manual
Xerox WorkCentre 5790 Family Service Manual

Xerox WorkCentre 5790 Family Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
708P90298
May 2013
Xerox
®
WorkCentre
®
5790 Family
Service Manual

Advertisement

Table of Contents
loading

Related Manuals for Xerox WorkCentre 5790 Family

Summary of Contents for Xerox WorkCentre 5790 Family

  • Page 1 708P90298 May 2013 Xerox ® WorkCentre ® 5790 Family Service Manual...

  • Page 2: Table Of Contents

    PL 7.70 Tray 5 Lift assembly (2 of 2) ................5-36 PL 11.16 2K LCSS Tamper Assembly ................5-77 PL 8 - Paper Transport PL 11.18 2K LCSS Ejector Assembly ................5-78 Parts Lists May 2013 Xerox® WorkCentre® 5790 Family...
  • Page 3 PL 11.181 Inserter Main Drives (3 of 3) ................5-118 PL 11 - Tri-Folder PL 11.190 Tri-Folder Covers................... 5-119 PL 11.193 Tri-Folder Drives module ................5-120 PL 11.195 Tri-Folder Top Door Cover Assembly ............5-121 Parts Lists May 2013 Xerox® WorkCentre® 5790 Family...

  • Page 4: Pl 1.10 Power And Control Assembly

    NOTE: 1. For the left door interlock (S01-305), refer to PL 7.30 Item 3. NOTE: 2. For additional information about the IOT PWB, refer to TAG 155 and TAG 156. Parts Lists May 2013 PL 1.10 Xerox® WorkCentre® 5790 Family...

  • Page 5: Pl 1.15 Main Power Cables

    – 152S06403 Argentina (65-90 ppm) – 152S06405 South Africa (65-90 ppm) 117E36280 20A power cord NOTE: This power cord can also be ordered as part of PL 31.14 Item 13. Parts Lists May 2013 PL 1.15 Xerox® WorkCentre® 5790 Family...

  • Page 6: Pl 2.10 User Interface

    UI touch screen ribbon cable (40 way) (P/O PL 2.10 Item 6) (PJ944, PJ907) – UI touch screen ribbon cable (12 way) (P/O PL 2.10 Item 6) (PJ942, PJ906) – Safety cover (Not Spared) Parts Lists May 2013 PL 2.10 Xerox® WorkCentre® 5790 Family...

  • Page 7: Pl 3.22 Single Board Controller Pwb Module (1 Of 2)

    HDD thumb screw (Not Spared) 813W25205 Locking screw – HDD power cable (Not Spared) – HDD data cable (Not Spared) – Foreign device interface kit (REF: PL 31.14 Item 2) Parts Lists May 2013 PL 3.22 Xerox® WorkCentre® 5790 Family...

  • Page 8: Pl 3.24 Single Board Controller Pwb Module (2 Of 2)

    Thumbscrew (Not Spared) – Extension bracket (Not Spared) 014E68681 Spacer 960K59821 Scanner daughter PWB (W/TAG 150) – Scanner daughter PWB/scanner PWB video PWB harness (REF: PL 14.15 Item 13) (PJ6) 105K36240 Battery Parts Lists May 2013 PL 3.24 Xerox® WorkCentre® 5790 Family...

  • Page 9: Pl 4.10 Main Drive Module (65-90 Ppm) (1 Of 2)

    Photoreceptor drive motor (09-010) (P/O PL 4.10 Item 1) – Dowel pin (P/O PL 4.10 Item 1) NOTE: The main drive motor is an integral part of the main drive PWB. Parts Lists May 2013 PL 4.10 Xerox® WorkCentre® 5790 Family...

  • Page 10: Pl 4.12 Main Drive Module (65-90 Ppm) (2 Of 2)

    Charge scorotron grid harness (P/O PL 4.10 Item 1) – Auto cleaner harness (P/O PL 4.10 Item 1) – Idler (P/O PL 4.10 Item 1) – Bearing (P/O PL 4.12 Item 10) Parts Lists May 2013 PL 4.12 Xerox® WorkCentre® 5790 Family...

  • Page 11: Pl 4.15 Main Drive Module (35-55 Ppm) (1 Of 2)

    Mounting bracket (P/O PL 4.15 Item 1) – Photoreceptor drive motor (MOT09- 010) (P/O PL 4.15 Item 1) NOTE: The main drive motor is an integral part of the main drive PWB. Parts Lists May 2013 PL 4.15 5-10 Xerox® WorkCentre® 5790 Family...

  • Page 12: Pl 4.17 Main Drive Module (35-55 Ppm) (2 Of 2)

    Auto cleaner harness (P/O PL 4.15 Item 1) – Charge scorotron harness (P/O PL 4.15 Item 1) – Charge scorotron grid harness (P/O PL 4.15 Item 1) – Idler (P/O PL 4.15 Item 1) Parts Lists May 2013 PL 4.17 Xerox® WorkCentre® 5790 Family 5-11...

  • Page 13: Pl 5.10 Dadh (Complete), Covers, Dadh Pwb

    NOTE: 1. For the DADH closed switch (Q05-300), refer to PL 14.15 - W/TAG 150 or PL 14.25 - W/O TAG 150. NOTE: 2. To clean the DADH, refer to ADJ 5.4. Parts Lists May 2013 PL 5.10 5-12 Xerox® WorkCentre® 5790 Family...

  • Page 14: Pl 5.17 Feed Assembly (40-90 Ppm)

    DADH feed bearing kit (Complete) NOTE: 1. HFSI. To reset the HFSI count, refer to GP 17. NOTE: 2. For the feed motor drive belt, refer to PL 5.35 Item Parts Lists May 2013 PL 5.15 Xerox® WorkCentre® 5790 Family 5-13...
  • Page 15 Spacer (P/O PL 5.17 Item 30) NOTE: 1. HFSI. To reset th HFSI count, refer to GP 17. NOTE: 2.For the feed motor drive belt, refer to PL 5.35 Item Parts Lists May 2013 PL 5.17 5-14 Xerox® WorkCentre® 5790 Family...

  • Page 16: Pl 5.20 Top Cover Assembly

    Top cover – Top cover assembly (REP 5.1) – Top access cover assembly (REP 5.2) NOTE: For the top cover interlock switch (S05-305), refer to PL 5.17 Item 11. Parts Lists May 2013 PL 5.20 Xerox® WorkCentre® 5790 Family 5-15...

  • Page 17: Pl 5.25 Cvt

    Spacer (white) (P/O PL 5.10 Item 9) 004E22560 CVT Motor bracket – Ground harness (Not Spared) 604K55240 CVT roll kit (white) (W/TAG D-004) – 604K48370 CVT roll kit (grey) (W/O TAG D- 004) Parts Lists May 2013 PL 5.25 5-16 Xerox® WorkCentre® 5790 Family...

  • Page 18: Pl 5.30 Baffle Assembly

    Link arm (P/O PL 5.30 Item 5) 604K48160 Mylar guide strip (REP 5.20) – Not used – Not used – Not used – Spring (P/O PL 5.30 Item 19) – Duplex solenoid assembly Parts Lists May 2013 PL 5.30 Xerox® WorkCentre® 5790 Family 5-17...

  • Page 19: Pl 5.35 Input Tray Assembly

    Item 1) (40-90 ppm) – Lower cover (P/O PL 5.35 Item 1) (35 ppm) NOTE: This part is also spared as part of a kit PL 31.13 Item 3 containing 2 sensors. Parts Lists May 2013 PL 5.35 5-18 Xerox® WorkCentre® 5790 Family...

  • Page 20: Pl 5.40 Document Cover

    RH Adaptor plate (P/O PL 5.40 Item 1) – Platen cover handle (P/O PL 5.40 Item 1) – Magnetic interlock (P/O PL 5.40 Item 2) – Cover platen (P/O PL 5.40 Item 2) Parts Lists May 2013 PL 5.40 Xerox® WorkCentre® 5790 Family 5-19...

  • Page 21: Pl 6.10 Ros

    ROS Power distribution (PJ120- PJ18)/communication (PJ121-PJ2 & PJ122-PJ228) harness (Not Spared) (65-90 ppm) – Scanner frame securing bracket (Not Spared) – Spacer (Not Spared) – ROS (P/O PL 6.10 Item 4) Parts Lists May 2013 PL 6.10 5-20 Xerox® WorkCentre® 5790 Family...

  • Page 22: Pl 7.10 Tray 1 And 2 Assembly

    TAG 001) (REP 7.1) – Lift arm bracket (P/O PL 7.10 Item 26, PL 7.10 Item 27) NOTE: 1. For the envelope tray feeding kit please refer to PL 31.13 Item 18. Parts Lists May 2013 PL 7.10 Xerox® WorkCentre® 5790 Family 5-21...

  • Page 23: Pl 7.15 Hcf Tray 3 And 4 Assembly (W/O Tag 151) (1 Of 2)

    NOTE: 1. Refer to ADJ 7.1 to set the tray 3 and tray 4 paper guides. NOTE: 2. To repair or prevent paper cut damage to the front edge of tray assembly, use the rib protector kit PL 31.11 Item Parts Lists May 2013 PL 7.15 5-22 Xerox® WorkCentre® 5790 Family...

  • Page 24: Pl 7.17 Hcf Tray 3 And 4 Assembly (W/O Tag 151) (2 Of 2)

    Front clip (P/O PL 7.17 Item 14) – Rear clip (P/O PL 7.17 Item 14) – Alignment locking clip (P/O PL 31.12 Item 1) 807E47310 Elevator drives gear coupling (REP 7.4) Parts Lists May 2013 PL 7.17 Xerox® WorkCentre® 5790 Family 5-23...

  • Page 25: Pl 7.18 Hcf Tray 3 And 4 Assembly (W/Tag 151) (1 Of 2)

    PL 31.12 Item 20. NOTE: 2. To repair or prevent paper cut damage to the front edge of tray assembly, use the rib protector kit PL 31.11 Item Parts Lists May 2013 PL 7.18 5-24 Xerox® WorkCentre® 5790 Family...

  • Page 26: Pl 7.19 Hcf Tray 3 And 4 Assembly (W/Tag 151) (2 Of 2)

    Elevator drives gear coupling (REP 7.4) – Tray 4 paper guide (P/O PL 7.18 Item 2) – Tray 3 paper guide (P/O PL 7.18 Item 3) 815E73163 Separation strip Parts Lists May 2013 PL 7.19 Xerox® WorkCentre® 5790 Family 5-25...

  • Page 27: Pl 7.20 Elevator Motor And Control Pwb (W/O Tag 151)

    – Not used 120E25810 Tray 4 stack limiter (REP 7.8) 868E11660 Tray 3 stack limiter bracket 120E25800 Tray 3 stack limiter (REP 7.8) 868E11670 Tray 4 stack limiter bracket Parts Lists May 2013 PL 7.20 5-26 Xerox® WorkCentre® 5790 Family...

  • Page 28: Pl 7.21 Elevator Motor And Control Pwb (W/Tag 151)

    Tray 3 home sensor (Q07-303)/ Tray 4 home sensor (Q07-304) (REP 7.26) NOTE: Install only when noise reduction is required due to noisy tray 3 and 4 feed motors and HCF motor. Parts Lists May 2013 PL 7.21 Xerox® WorkCentre® 5790 Family 5-27...

  • Page 29: Pl 7.25 Hcf Covers (W/O Tag 151)

    848E63650 Right cover – Cover infill 1 (P/O PL 7.25 Item 10) – Cover infill 2 (P/O PL 7.25 Item 10) 848E17510 Cover infill kit – Castor (Not spared) Parts Lists May 2013 PL 7.25 5-28 Xerox® WorkCentre® 5790 Family...

  • Page 30: Pl 7.26 Hcf Covers (W/Tag 151)

    – Castor (Not spared) 848E63650 Right cover – Cover infill 1 (P/O PL 7.26 Item 10) – Cover infill 2 (P/O PL 7.26 Item 10) 848E17510 Cover infill kit Parts Lists May 2013 PL 7.26 Xerox® WorkCentre® 5790 Family 5-29...

  • Page 31: Pl 7.30 Bypass Tray And Left Door Assembly

    Middle pre-nip roll spring (Not Spared) NOTE: 1.Refer to PL 8.15 Item 3 for the 35-55 ppm wait sensor. NOTE: 2.HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 7.30 5-30 Xerox® WorkCentre® 5790 Family...

  • Page 32: Pl 7.40 Stand Assembly

    – Cover infill 2 (P/O PL 7.40 Item 11) 848E17510 Cover infill kit 848K12270 Left cover NOTE: Hinge pins (PL 7.40 Item 8) are supplied with the front door. Parts Lists May 2013 PL 7.40 Xerox® WorkCentre® 5790 Family 5-31...

  • Page 33: Pl 7.60 Tray 5 Covers

    (P/O PL 7.60 Item 1) – Label (Tray 5) (P/O PL 7.60 Item 8) – Label (Max) (P/O PL 7.60 Item 8) NOTE: For use with all Tray 5 SEF option kits Parts Lists May 2013 PL 7.60 5-32 Xerox® WorkCentre® 5790 Family...
  • Page 34 – Docking plate assembly (P/O PL 31.11 Item 11) 003K20681 Latch assembly NOTE: This part is can also be ordered as part of a kit PL 31.11 Item 11. Parts Lists May 2013 PL 7.62 Xerox® WorkCentre® 5790 Family 5-33...

  • Page 35: Pl 7.64 Tray 5 Guides

    Adjustment plate (P/O PL 7.64 Item – Docking pin (P/O PL 7.64 Item 13) – Rear guide assembly spring (P/O PL 7.64 Item 12) 038K16403 Rear guide assembly 029K04680 Docking pin assembly Parts Lists May 2013 PL 7.64 5-34 Xerox® WorkCentre® 5790 Family...

  • Page 36: Pl 7.68 Tray 5 Lift Assembly (1 Of 2)

    Elevator rack assembly (REP 7.21) – Upper limit switch actuator (Not Spared) – Tray level drive gear (P/O PL 7.68 Item 25) (REP 7.21) – Actuator spring (Not Spared) Parts Lists May 2013 PL 7.68 Xerox® WorkCentre® 5790 Family 5-35...

  • Page 37: Pl 7.70 Tray 5 Lift Assembly (2 Of 2)

    612W25655 Tray down limit switch screw 815K11380 Infill plate assembly 962K50461 Tray 5 elevator harness 032E29800 Rear elevator tray guide (REP 7.29) 032E29790 Front elevator tray guide (REP 7.29) Parts Lists May 2013 PL 7.70 5-36 Xerox® WorkCentre® 5790 Family...

  • Page 38: Pl 8.10 Main Covers

    Front door assembly (REF: PL 8.11 Item 10) (65-90 ppm) – Work shelf assembly kit 014E67571 Stand off cable holder (NOTE) NOTE: This part can also be ordered as part of PL 31.14 Item Parts Lists May 2013 PL 8.10 Xerox® WorkCentre® 5790 Family 5-37...

  • Page 39: Pl 8.11 Front Door Assembly (65-90 Ppm) (2 Of 3)

    Harness (P/O PL 8.11 Item 10) – Front door (P/O PL 8.11 Item 10) – Logo badge (P/O PL 8.11 Item 10) 848K48893 Front door assembly – Door hinge pin (P/O PL 8.11 Item Parts Lists May 2013 PL 8.11 5-38 Xerox® WorkCentre® 5790 Family...

  • Page 40: Pl 8.15 Registration Transport (35-55 Ppm)

    NOTE: 1. This is a HFSI. Refer to GP 17 and reset the bias foam count to zero in the feature screen. NOTE: 2. Sensor reference Q08-110 may also be seen when the tray 5 is present. Parts Lists May 2013 PL 8.15 Xerox® WorkCentre® 5790 Family 5-39...

  • Page 41: Pl 8.17 Registration Transport (65-90 Ppm)

    Drive shaft (P/O PL 8.17 Item 27) 604K55570 Drive roll repair kit (W/TAG 051) NOTE: This is a HFSI. Refer to GP 17 and reset the bias foam count to zero in the feature screen. Parts Lists May 2013 PL 8.17 5-40 Xerox® WorkCentre® 5790 Family...

  • Page 42: Pl 8.20 Duplex Transport (65-90 Ppm)

    Duplex drive roll shaft (P/O PL 8.20 Item 17) (W/TAG 051) 604K55570 Drive roll repair kit (W/TAG 051) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.20 Xerox® WorkCentre® 5790 Family 5-41...

  • Page 43: Pl 8.22 Duplex Transport (35-55 Ppm)

    Duplex drive roll shaft (P/O PL 8.22 Item 16) (W/O TAG 051) 604K55570 Drive roll repair kit (W/TAG 051) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.22 5-42 Xerox® WorkCentre® 5790 Family...

  • Page 44: Pl 8.25 Tray 1 And 2 Paper Feed Assembly (1 Of 2)

    Front transport roll bearing (REP 8.16) 059K70070 Transport roll (NOTE) 962K64030 Power harness 962K64020 Signal harness 120E36130 Cable holder 962K64040 Connection harness NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.25 Xerox® WorkCentre® 5790 Family 5-43...

  • Page 45: Pl 8.26 Tray 1 And 2 Paper Feed Assembly (2 Of 2)

    – Retard roll gate (P/O PL 8.26 Item – Clutch coupling (P/O PL 8.26 Item 1) (REP 8.39) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.26 5-44 Xerox® WorkCentre® 5790 Family...

  • Page 46: Pl 8.30 Tray 3 Paper Feed Assembly (W/O Tag 151)

    NOTE: 1. For the tray 3 feed sensor actuator, refer to PL 7.15 Item 9. NOTE: 2. HFSI. To reset the HFSI count, refer to GP 17. NOTE: 3. Also supplied as part of a kit PL 8.30 Item 1. Parts Lists May 2013 PL 8.30 Xerox® WorkCentre® 5790 Family 5-45...

  • Page 47: Pl 8.31 Tray 4 Paper Feed Assembly (W/O Tag 151)

    Feed roll shaft assembly (P/O PL 8.31 Item 10) – Paper stack deflector (P/O PL 8.31 Item 10) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.31 5-46 Xerox® WorkCentre® 5790 Family...

  • Page 48: Pl 8.32 Tray 3 Paper Feed Assembly (W/Tag 151)

    NOTE: 1. HFSI. To reset the HFSI count, refer to GP 17. NOTE: 2. Also supplied as part of the transport motor and drives kit, PL 8.36 Item 16. Parts Lists May 2013 PL 8.32 Xerox® WorkCentre® 5790 Family 5-47...

  • Page 49: Pl 8.33 Tray 4 Paper Feed Assembly (W/Tag 151)

    Retard roll (P/O PL 31.13 Item 14) (REP 8.54, ADJ 8.3) – Shim (P/O PL 31.13 Item 21) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.33 5-48 Xerox® WorkCentre® 5790 Family...

  • Page 50: Pl 8.35 Tray 3 Transport Assembly (W/O Tag 151)

    Spring plate (P/O PL 8.35 Item 15) – Base (P/O PL 8.35 Item 15) 059K43830 Tray 3 transport assembly (REP 8.13) NOTE: Refer to REP 8.13 for the tray 3 transport assembly. Parts Lists May 2013 PL 8.35 Xerox® WorkCentre® 5790 Family 5-49...

  • Page 51: Pl 8.36 Tray 3 Transport Assembly (W/Tag 151)

    Spring (P/O PL 8.36 Item 16) (REP 8.57) – Pulley flange (P/O PL 8.36 Item 16) (REP 8.57) 604K83700 Transport motor and drives kit – Tray 3 transport brace (Not Spared) Parts Lists May 2013 PL 8.36 5-50 Xerox® WorkCentre® 5790 Family...

  • Page 52: Pl 8.40 Tray 5 Feed Assembly (1 Of 3)

    962K50475 Elevator motor harness 962K63351 IOT to tray 5 harness – Not used – Feed/elevator motor harness (Not Spared) – Elevator harness shield (Not Spared) 007K14401 Gear 30T bearing Parts Lists May 2013 PL 8.40 Xerox® WorkCentre® 5790 Family 5-51...

  • Page 53: Pl 8.45 Tray 5 Feed Assembly (2 Of 3)

    NOTE: 2. Replaces the rolls installed with the feed roll retrofit kit, PL 8.45 Item 20. NOTE: 3. HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 8.45 5-52 Xerox® WorkCentre® 5790 Family...

  • Page 54: Pl 8.47 Tray 5 Feed Assembly (3 Of 3)

    – Clutch coupling (P/O PL 8.45 Item 20) (W/TAG P-002) – – Clutch coupling (Not Spared) (W/O TAG P-002) – Actuator pivot shaft bearing (P/O PL 8.47 Item 1) Parts Lists May 2013 PL 8.47 Xerox® WorkCentre® 5790 Family 5-53...

  • Page 55: Pl 9.10 Waste Toner Bottle Assembly

    Waste toner door switch (S09-380) (REF: PL 4.10 Item 8, PL 4.15 Item – Sensor cover (Not Spared) 848E96690 Toner cover NOTE: Refer to REP 9.1 for the waste toner bottle assembly. Parts Lists May 2013 PL 9.10 5-54 Xerox® WorkCentre® 5790 Family...

  • Page 56: Pl 9.15 Developer Assembly (65-90 Ppm)

    NOTE: 2. The main drive gear PL 9.15 Item 16 and developer drive gear/pulley PL 4.12 Item 17, must always be replaced as a pair. NOTE: 3. HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 9.15 Xerox® WorkCentre® 5790 Family 5-55...

  • Page 57: Pl 9.17 Developer Assembly (35-55 Ppm)

    NOTE: 1. To remove and replenish the developer material, refer to the developer charge kit, PL 9.17 Item 25. NOTE: 2. A waste toner bottle, PL 9.10 Item 1 is supplied with the toner cartridges. Parts Lists May 2013 PL 9.17 5-56 Xerox® WorkCentre® 5790 Family...

  • Page 58: Pl 9.20 Xerographic Module And Short Paper Path Assembly (40-90 Ppm)

    NOTE: 1. A transfer/detack corotron PL 9.20 Item 8 is supplied with the xerographic module. NOTE: 2. For the charge scorotron and the charge scorotron grid harnesses, refer to PL 4.17 or PL 4.12. Parts Lists May 2013 PL 9.20 Xerox® WorkCentre® 5790 Family 5-57...

  • Page 59: Pl 9.22 Xerographic Module And Short Paper Path Assembly (35 Ppm)

    NOTE: 1. A transfer/detack corotron PL 9.22 Item 8 is supplied with the xerographic module NOTE: 2. For the charge scorotron and charge scoroton grid harnesses, refer to PL 4.17. Parts Lists May 2013 PL 9.22 5-58 Xerox® WorkCentre® 5790 Family...

  • Page 60: Pl 9.25 Ozone Fan And Photoreceptor Fan

    – Magnet (P/O PL 9.25 Item 2) – Photoreceptor duct (P/O PL 9.25 Item 6) 127K53200 Photoreceptor fan assembly – Fan (P/O PL 9.25 Item 6) 054E33001 Lower duct Parts Lists May 2013 PL 9.25 Xerox® WorkCentre® 5790 Family 5-59...

  • Page 61: Pl 10.8 Fuser Module Assembly (35-55 Ppm)

    NOTE: 1. An ozone filter, PL 9.25 Item 3, is supplied with the fuser module. NOTE: 2. For the fuser web motor, fuser connector assembly and fuser CRUM connector, refer to PL 4.15. Parts Lists May 2013 PL 10.8 5-60 Xerox® WorkCentre® 5790 Family...

  • Page 62: Pl 10.10 Fuser Module Assembly (65-90 Ppm)

    NOTE: 1. An ozone filter, PL 9.25 Item 3 is supplied with the fuser module. NOTE: 2. For the fuser web motor, fuser connector assembly and fuser CRUM connector, refer to PL 4.10. Parts Lists May 2013 PL 10.10 Xerox® WorkCentre® 5790 Family 5-61...

  • Page 63: Pl 10.11 Inverter Assembly (1 Of 4)

    (REP 10.2) – Output guide (P/O PL 10.11 Item 25) (REP 10.18) – Output guide assembly (Not Spared) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 10.11 5-62 Xerox® WorkCentre® 5790 Family...

  • Page 64: Pl 10.12 Inverter Assembly (2 Of 4)

    Rear gravity gate finger kit (W/TAG 005) NOTE: 1. For 35-55 ppm speed machines do not have the inverter sensor. NOTE: 2. HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 10.12 Xerox® WorkCentre® 5790 Family 5-63...

  • Page 65: Pl 10.13 Inverter Assembly (3 Of 4)

    (NOTE) (W/TAG 046, TAG 047) 604K55120 Decurler soft roll repair kit (NOTE) (W/TAG 046, TAG 047) NOTE: The decurler roll is only to be installed on W/TAG 046, TAG 047machines. Parts Lists May 2013 PL 10.13 5-64 Xerox® WorkCentre® 5790 Family...

  • Page 66: Pl 10.14 Inverter Assembly (4 Of 4)

    Upper inverter drive shaft (P/O PL 10.14 Item 11) (W/O TAG 051) – Lower inverter drive shaft (P/O PL 10.14 Item 11) (W/O TAG 051) 604K55570 Drive roll repair kit (W/TAG 051) Parts Lists May 2013 PL 10.14 Xerox® WorkCentre® 5790 Family 5-65...

  • Page 67: Pl 10.15 Inverter Drive Gears And Jam Clearance Knobs

    Jam clearance knob 003E77251 Latch cam handle – Inverter motor gear (35-55 ppm) (REF: PL 10.11 Item 11) – – Inverter motor gear (65-90 ppm) (REF: PL 10.11 Item 11) Parts Lists May 2013 PL 10.15 5-66 Xerox® WorkCentre® 5790 Family...

  • Page 68: Pl 10.20 Inverter Decurler Assembly W/Tag 046/047

    Inverter decurler assembly (65-90 ppm) – Shoulder screw (M4x12) (P/O PL 10.20 Item 1) NOTE: The inverter decurler soft roll repair kit is shown on PL 10.13 Item 9. Parts Lists May 2013 PL 10.20 Xerox® WorkCentre® 5790 Family 5-67...

  • Page 69: Pl 10.21 Oct Inverter Decurler Assembly W/Tag 148

    Do not use the W/TAG 148 right hand cover with an output device other than the OCT Transport assembly. The right cover will expose moving parts if not used correctly. Moving parts can cause injury. Parts Lists May 2013 PL 10.21 5-68 Xerox® WorkCentre® 5790 Family...

  • Page 70: Pl 10.25 Short Paper Path Assembly

    4B latch kit – Not Used – Carrier seal (P/O PL 31.10 Item 6) NOTE: 1. For the registration and halo bias contact, refer to PL 8.15 Item 23. Parts Lists May 2013 PL 10.25 Xerox® WorkCentre® 5790 Family 5-69...

  • Page 71: Pl 11.2 2K Lcss Covers

    – Hole punch assembly cover (Not Spared) 604K48150 Bin 1 tray kit (improved stacking) (W/TAG F-013) NOTE: Refer to ADJ 11.2-110 to align the 2K LCSS to the machine. Parts Lists May 2013 PL 11.2 5-70 Xerox® WorkCentre® 5790 Family...

  • Page 72: Pl 11.4 2K Lcss Docking Latch

    Docking interlock switch (S11-300) 003K20401 Link bracket assembly – Stopper (Not Spared) – Docking latch (P/O PL 11.4 Item 8) – Not used 120K02590 Docking actuator 003K20410 Docking latch assembly (REP 11.16-110) Parts Lists May 2013 PL 11.4 Xerox® WorkCentre® 5790 Family 5-71...

  • Page 73: Pl 11.6 2K Lcss Hole Punch Unit

    Punch Spacer (P/O PL 11.6 Item 9) (W/TAG F-006) – Punch Sensor Assembly (Not Spared) (W/O TAG F-008) – – Punch Sensor Assembly (W/TAG F-008) 014K10610 Hole punch assembly cover Parts Lists May 2013 PL 11.6 5-72 Xerox® WorkCentre® 5790 Family...

  • Page 74: Pl 11.8 2K Lcss Paddle Wheel/Safety Gate

    Shaft (P/O PL 11.8 Item 4) (W/TAG F-016) – Paddle (P/O PL 11.8 Item 4) (NOTE) (W/TAG F-016) NOTE: Paddles are also supplied (4 off) as a kit PL 31.12 Item 11. Parts Lists May 2013 PL 11.8 Xerox® WorkCentre® 5790 Family 5-73...

  • Page 75: Pl 11.10 2K Lcss Bin 1 Control Components (1 Of 2)

    11.1-110) – Motor bracket (Not Spared) 130E12330 Motor encoder sensor (Q11-336) – Pulley assembly (Not Spared) – Belt tensioner (Not Spared) – Spring (Not Spared) – Idler (Not Spared) Parts Lists May 2013 PL 11.10 5-74 Xerox® WorkCentre® 5790 Family...

  • Page 76: Pl 11.12 2K Lcss Bin 1 Control Components (2 Of 2)

    – Not used 130E10360 Bin 1 Upper level sensor (Q11- 332), Bin 1 Lower level sensor (Q11-333) (REP 11.11-110) – Actuator (Not Spared) – Sensor support assembly (Not Spared) Parts Lists May 2013 PL 11.12 Xerox® WorkCentre® 5790 Family 5-75...

  • Page 77: Pl 11.14 2K Lcss Paper Entry Transport

    013E25790 Nylon bearing 006K27980 Feed roll shaft (short) 013E25800 Bearing – Jam clearance guide (P/O PL 11.24 Item 1) 006K31670 Feed roll shaft (long) – Thumb wheel (Not Spared) Parts Lists May 2013 PL 11.14 5-76 Xerox® WorkCentre® 5790 Family...

  • Page 78: Pl 11.16 2K Lcss Tamper Assembly

    (Q11-006), Rear tamper home away sensor (Q11-319) – Sensor bracket (P/O PL 11.16 Item – Static eliminator (stacker) (REF: PL 11.23 Item 7) – Sensor retainer (P/O PL 11.16 Item Parts Lists May 2013 PL 11.16 Xerox® WorkCentre® 5790 Family 5-77...

  • Page 79: Pl 11.18 2K Lcss Ejector Assembly

    Slide ejector bearing (P/O PL 11.18 Item 15) – Wide slide ejector bearing (P/O PL 11.18 Item 15) – Cushion washer (P/O PL 11.18 Item 15) 604K67690 LCSS bearing assembly kit Parts Lists May 2013 PL 11.18 5-78 Xerox® WorkCentre® 5790 Family...

  • Page 80: Pl 11.20 2K Lcss Staple Head Unit/Traverse Assembly

    Stapler cover (P/O PL 11.20 Item 1) – Staple cartridge (REF: PL 26.10 Item 11) – Not used – Sensor cover (P/O PL 11.20 Item 1) – Staple head assembly (P/O PL 11.20 Item 1) Parts Lists May 2013 PL 11.20 Xerox® WorkCentre® 5790 Family 5-79...

  • Page 81: Pl 11.22 2K Lcss Bin 0 Entry

    Paper output drive belt (REP 11.4- 110) 006K27970 Drive shaft assembly 003K17531 Jam clearance knob – Belt tensioner (Not Spared) – Spring (Not Spared) – Washer (Not Spared) – Actuator (Not Spared) Parts Lists May 2013 PL 11.22 5-80 Xerox® WorkCentre® 5790 Family...

  • Page 82: Pl 11.23 2K Lcss Bin 1 Entry

    – Paper output drive belt (REF: PL 11.22 Item 14) – Upper right hand paper guide (Not Spared) 013E25800 Bearing – Mylar safety cover (P/O PL 11.23 Item 1) Parts Lists May 2013 PL 11.23 Xerox® WorkCentre® 5790 Family 5-81...

  • Page 83: Pl 11.24 2K Lcss Entry Guide Cover/Jam Clearance Guide

    11.24 Item 1) 130E10380 Entry sensor (Q11-100) – Sensor bracket (Not Spared) 848K06160 Entry guide cover (REP 11.15-110) – Jam clearance guide (P/O PL 11.24 Item 1) 809E78390 Latch Parts Lists May 2013 PL 11.24 5-82 Xerox® WorkCentre® 5790 Family...

  • Page 84: Pl 11.26 2K Lcss Electrical

    Do not install a new 2K LCSS PWB until the cause of the damage to the old 2K LCSS PWB has been determined. Go to the 11G-110 2K LCSS PWB Damage RAP. Parts Lists May 2013 PL 11.26 Xerox® WorkCentre® 5790 Family 5-83...

  • Page 85: Pl 11.100 1K Lcss Covers

    Right hand cover (Not Spared) 019K13380 Bin 1 alignment clip 017E11260 Stability foot (REP 11.3-120) NOTE: W/TAG L-013 improves stacking on machines running large stacks of 8.5" x 11" or A4 LEF. Parts Lists May 2013 PL 11.100 5-84 Xerox® WorkCentre® 5790 Family...

  • Page 86: Pl 11.102 1K Lcss Docking Latch

    – Not used – Docking latch (P/O PL 11.102 Item 8) (REP 11.14-120) – Spring (P/O PL 11.102 Item 8) 120K02590 Docking actuator 003K20391 Docking latch assembly (REP 11.14-120) Parts Lists May 2013 PL 11.102 Xerox® WorkCentre® 5790 Family 5-85...

  • Page 87: Pl 11.104 1K Lcss Paddle Wheel/Safety Gate

    Output cover (REF: PL 11.100 Item 127K55840 Paddle motor assembly (MOT11- 024) 130E12330 Paddle roll position sensor (Q11- 326) NOTE: Paddles are also supplied (4 off) as a kit PL 31.13 Item 11. Parts Lists May 2013 PL 11.104 5-86 Xerox® WorkCentre® 5790 Family...

  • Page 88: Pl 11.106 1K Lcss Bin 1 Control Components

    Bin 1 lower limit switch (S11-335) – Pulley assembly (Not Spared) – Sensor support (Not Spared) – P-clamp (Not Spared) – Belt tensioner (Not Spared) – Spring (Not Spared) – Idler (Not Spared) Parts Lists May 2013 PL 11.106 Xerox® WorkCentre® 5790 Family 5-87...

  • Page 89: Pl 11.110 1K Lcss Paper Entry Transport

    Nylon bearing 006K27980 Feed roll shaft (short) 013E25800 Bearing – Paper entry guide assembly (REF: PL 11.122 Item 1) 006K31670 Feed roll shaft (long) – Thumb wheel (Not Spared) Parts Lists May 2013 PL 11.110 5-88 Xerox® WorkCentre® 5790 Family...

  • Page 90: Pl 11.112 1K Lcss Tamper Assembly

    (Q11-006), Rear tamper home away sensor (Q11-319) – Sensor bracket (P/O PL 11.112 Item 1) – Static eliminator (stacker) (REF: PL 11.120 Item 7) – Sensor retainer (P/O PL 11.112 Item 1) Parts Lists May 2013 PL 11.112 Xerox® WorkCentre® 5790 Family 5-89...

  • Page 91: Pl 11.114 1K Lcss Ejector Assembly

    11.8-120) – Pulley (Not Spared) 023E24330 Ejector belt (REP 11.15-120) – Clip (P/O PL 11.114 Item 1) 020K21490 Pulley drive gear – Washer (Not Spared) – KL-Clip (Not Spared) Parts Lists May 2013 PL 11.114 5-90 Xerox® WorkCentre® 5790 Family...

  • Page 92: Pl 11.116 1K Lcss Staple Head Assembly

    Staple head unit (P/O PL 11.116 Item 1) – Stapler cover (P/O PL 11.116 Item – Cable clamp (P/O PL 11.116 Item – Staple cartridge (Not Spared) – Staple refills (Not Spared) Parts Lists May 2013 PL 11.116 Xerox® WorkCentre® 5790 Family 5-91...

  • Page 93: Pl 11.118 1K Lcss Bin 0 Entry

    Diverter solenoid (SOL11-002) – Shaft diverter assembly (P/O PL 31.13 Item 6) (W/TAG L-003) – Belt tensioner (Not Spared) 006K27970 Drive shaft assembly 003K17531 Jam clearance knob – Actuator (Not Spared) Parts Lists May 2013 PL 11.118 5-92 Xerox® WorkCentre® 5790 Family...

  • Page 94: Pl 11.120 1K Lcss Bin 1 Entry

    Spared) 013E25800 Bearing – Belt tensioner (Not Spared) – Spring (Not Spared) 127K55830 Transport motor 2 (MOT 11-001) (REP 11.4-120) – Mylar safety cover (P/O PL 11.120 Item 1) Parts Lists May 2013 PL 11.120 Xerox® WorkCentre® 5790 Family 5-93...

  • Page 95: Pl 11.122 1K Lcss Entry Guide Cover/Jam Clearance Guide

    11.122 Item 1) 130E10380 Entry sensor (Q11-100) – Sensor bracket (Not Spared) 848K06160 Entry guide cover (REP 11.13-120) – Jam clearance guide (P/O PL 11.122 Item 1) 809E78390 Latch Parts Lists May 2013 PL 11.122 5-94 Xerox® WorkCentre® 5790 Family...

  • Page 96: Pl 11.124 1K Lcss Electrical

    Do not install a new 1K LCSS PWB until the cause of the damage to the old LCSS PWB has been determined. Go to the 11G-120 LCSS PWB Damage RAP. Parts Lists May 2013 PL 11.124 Xerox® WorkCentre® 5790 Family 5-95...

  • Page 97: Pl 11.130 Hvf Covers And Docking

    11.130 Item 11) 017K04630 Adjustable castor (REP 11.96-171) – Adjustable castor washer (P/O PL 11.130 Item 13) 017K04640 Mounting bracket assembly 110K20900 Docking interlock switch (S11-300) 120K02590 Docking actuator Parts Lists May 2013 PL 11.130 5-96 Xerox® WorkCentre® 5790 Family...

  • Page 98: Pl 11.135 Hvf Stacker

    – Sensor/switch bracket (Not Spared) – Stacker tray guide (P/O PL 11.135 Item 26) – Stacker tray guide pulley (P/O PL 11.135 Item 26) 110K21060 Stacker tray guide assembly Parts Lists May 2013 PL 11.135 Xerox® WorkCentre® 5790 Family 5-97...

  • Page 99: Pl 11.140 Hvf Ejector, Pressing And Support (1 Of 2)

    Rear tamper drive belt (P/O PL 11.140 Item 13) – Staple cartridge (REF: PL 26.10 Item 22) 822E18820 Ejector belt cover (REP 11.6-171) – Front support finger guide (Not Spared) Parts Lists May 2013 PL 11.140 5-98 Xerox® WorkCentre® 5790 Family...

  • Page 100: Pl 11.145 Hvf Ejector, Pressing And Support (2 Of 2)

    11.101-171) 110K13980 Front door interlock switch (S11- 303) NOTE: 1. HFSI. To reset the HFSI count, refer to GP 17. NOTE: 2. Supplied as a set of 4 rolls. Parts Lists May 2013 PL 11.145 Xerox® WorkCentre® 5790 Family 5-99...

  • Page 101: Pl 11.150 Hvf Main Drives

    Bypass feed motor belt (Not Spared) – Buffer feed motor belt (Not Spared) – Exit feed motor 2 belt (A) (Not Spared) – Exit feed motor 2 belt (B) (Not Spared) Parts Lists May 2013 PL 11.150 5-100 Xerox® WorkCentre® 5790 Family...

  • Page 102: Pl 11.153 Hvf Feed Assembly And Punch (1 Of 3)

    4 Hole (P/O PL 31.10 Item 5) (XE) – – 4 Hole (Sweden) (P/O PL 31.10 Item 5) 130E10380 Chad bin level sensor (Q11-348) NOTE: There is no component control code for the paper edge sensor Parts Lists May 2013 PL 11.153 Xerox® WorkCentre® 5790 Family 5-101...

  • Page 103: Pl 11.155 Hvf Feed Assembly And Punch (2 Of 3)

    Input roll (REF: PL 11.155 Item 1) (REP 11.40-171) – Bearing (Not Spared) 006K32690 Stacker exit roll – Top exit roll (Not Spared) – Top exit feed roll (REF: PL 11.155 Item 1) (REP 11.47-171) Parts Lists May 2013 PL 11.155 5-102 Xerox® WorkCentre® 5790 Family...

  • Page 104: Pl 11.156 Hvf Feed Assembly And Punch (3 Of 3)

    (Q11-140)/Buffer position sensor (Q11-157)/Buffer path sensor (Q11-164)/Inserter sensor (NOTE) 130E12840 Top exit sensor (Q11-130)/Booklet exit sensor (Q11-158) NOTE: There is no component code number for the Inserter sensor Parts Lists May 2013 PL 11.156 Xerox® WorkCentre® 5790 Family 5-103...

  • Page 105: Pl 11.157 Hvf Power And Control

    HVF control PWB (REP 11.57-171) 960K41780 Pause to unload PWB (REP 11.97- 171) 105K36840 Power cord – Inline fuse (10A slo-blow) (Not Spared) – Harness (Not Spared) 952K00410 Power communications cable Parts Lists May 2013 PL 11.157 5-104 Xerox® WorkCentre® 5790 Family...

  • Page 106: Pl 11.160 Hvf Bm Module (Complete)

    PL 11.160 HVF BM Module (Complete) Item Part Description 801K27251 BM Module (REP 11.61-171) 010K04360 Slide assembly (REP 11.62-171) Parts Lists May 2013 PL 11.160 Xerox® WorkCentre® 5790 Family 5-105...

  • Page 107: Pl 11.161 Hvf Bm Entry And Front Cover..................................................................... Pl 11.162 Hvf Bm Tamper Assembly

    BM Compiler shaft (Not Spared) 125K03831 Static eliminator – Top baffle (Not Spared) – Pulley (P/O PL 11.161 Item 30) – BM flapper drive belt (Not Spared) – BM Flapper assembly (Not Spared) Parts Lists May 2013 PL 11.161 5-106 Xerox® WorkCentre® 5790 Family...
  • Page 108 BM Tamper guide plate (Not Spared) (REP 11.30-171) – BM Rear tamper finger (Not Spared) (REP 11.30-171) – BM Front tamper finger (Not Spared) (REP 11.30-171) 125K03593 BM Static eliminator Parts Lists May 2013 PL 11.162 Xerox® WorkCentre® 5790 Family 5-107...

  • Page 109: Pl 11.163 Hvf Bm Back Stop Motor

    BM back stop link (REP 11.26-171) – LH frame plate (Not Spared) 107E22600 BM back stop guide home sensor (Q11-383) – Not used 127K54710 BM back stop motor assembly (REP 11.20-171) Parts Lists May 2013 PL 11.163 5-108 Xerox® WorkCentre® 5790 Family...

  • Page 110: Pl 11.164 Hvf Bm Back Stop Assembly

    006K30790 BM back stop drive shaft (REP 11.26-171) 023E23140 BM back stop belt (REP 11.26-171) – BM back stop shaft (Not Spared) 019K13550 BM back stop assembly (REP 11.21-171) Parts Lists May 2013 PL 11.164 Xerox® WorkCentre® 5790 Family 5-109...

  • Page 111: Pl 11.165 Hvf Bm Crease Blade Motor

    Motor cover 809E42861 Crease nip spring (REP 11.58-171) 815K11660 Crease blade assembly (REP 11.36-171) 032E19330 Crease blade support guide (REP 11.36-171) – Crease blade home sensor bracket (Not Spared) Parts Lists May 2013 PL 11.165 5-110 Xerox® WorkCentre® 5790 Family...

  • Page 112: Pl 11.166 Hvf Bm Crease Rolls Motor And Pwb

    – BM flapper motor pulley (Not Spared) – BM flapper motor drive belt (Not Spared) – Tri-folder interlock cheat (PJ553) (Not Spared) – Tri-folder logic cheat (PJ563) (Not Spared) Parts Lists May 2013 PL 11.166 Xerox® WorkCentre® 5790 Family 5-111...

  • Page 113: Pl 11.167 Hvf Bm Crease Rolls And Support Leg

    807E06040 Upper crease roll gear – Lower crease roll and clutch assembly (P/O PL 11.167 Item 25) – Wavy washer (P/O PL 11.167 Item 604K42120 Crease roll repair kit Parts Lists May 2013 PL 11.167 5-112 Xerox® WorkCentre® 5790 Family...

  • Page 114: Pl 11.168 Hvf Bm Stapler Assemblies

    107E22600 BM Stapler head carrier closed sensor (Q11-421) (Not Spared) (REP 11.28-171) – Lower shaft (Not Spared) (REP 11.28-171) – Upper shaft (Not Spared) (REP 11.28-171) 055E51870 Mylar guide Parts Lists May 2013 PL 11.168 Xerox® WorkCentre® 5790 Family 5-113...

  • Page 115: Pl 11.169 Hvf Bm Bin 2

    Thumbscrew (Not Spared) – HVF BM Bin 2 assembly (Not Spared) – HVF BM Bin 2 connector (Not Spared) 809E47341 HVF Bin 2 actuator spring 007E69000 Gear (50T)/pulley (24T) Parts Lists May 2013 PL 11.169 5-114 Xerox® WorkCentre® 5790 Family...

  • Page 116: Pl 11.175 Inserter Covers

    171, REP 11.95-171) 848K19170 Sensor tray assembly (REP 11.89- 171) 848K19180 Top left door assembly (REP 11.92- 171) NOTE: Inserter paper width sensor 2 has no component control code. Parts Lists May 2013 PL 11.175 Xerox® WorkCentre® 5790 Family 5-115...

  • Page 117: Pl 11.177 Inserter Main Drives (1 Of 3)

    Loading lever (Not Spared) – Loading gear (Not Spared) – Bearing (Not Spared) – Torsion spring (Not Spared) – Loading shaft (Not Spared) – Front loading bracket (Not Spared) Parts Lists May 2013 PL 11.177 5-116 Xerox® WorkCentre® 5790 Family...

  • Page 118: Pl 11.179 Inserter Main Drives (2 Of 3)

    Drive coupling (Not Spared) – Reverse feed roll core (Not Spared) – Pin (Not Spared) – Shaft (Not Spared) NOTE: HFSI. To reset the HFSI count, refer to GP 17. Parts Lists May 2013 PL 11.179 Xerox® WorkCentre® 5790 Family 5-117...

  • Page 119: Pl 11.181 Inserter Main Drives (3 Of 3)

    Idler (Not Spared) – Bottom shaft drive (Not Spared) – Feed roller drive gear (Not Spared) – Tray down clutch (Not Spared) – Tray down clutch assembly (Not Spared) Parts Lists May 2013 PL 11.181 5-118 Xerox® WorkCentre® 5790 Family...

  • Page 120: Pl 11.190 Tri-Folder Covers

    Top cover interlock sensor (Q11- 394) (REP 11.77-171) – Top cover locking stud (Not Spared) 802E99581 Front cover 017K04190 Castor NOTE: For detail of bin 2, refer to PL 11.169. Parts Lists May 2013 PL 11.190 Xerox® WorkCentre® 5790 Family 5-119...

  • Page 121: Pl 11.193 Tri-Folder Drives Module

    Feed roll drive belt (REP 11.68- 171) 020E39921 Pulley gear 19T/20T BM (REP 11.68-171) 020E39930 Pulley gear 38T (REP 11.68-171) – Drive assembly bracket (P/O PL 11.193 Item 12) Parts Lists May 2013 PL 11.193 5-120 Xerox® WorkCentre® 5790 Family...

  • Page 122: Pl 11.195 Tri-Folder Top Door Cover Assembly

    Latch spring (P/O PL 11.195 Item 059K58690 Idler assembly (REP 11.73-171) – Idler spring (P/O PL 11.195 Item 848K11680 Top cover door assembly (REP 11.73-171) – Idler assembly (Not Spared) Parts Lists May 2013 PL 11.195 Xerox® WorkCentre® 5790 Family 5-121...

  • Page 123: Pl 11.197 Tri-Folder Main Drives Assembly

    Exit sensor (Q11-086) (REP 11.79- 171) – Not used – Feed roller bearing (Not Spared) – Feed roller (Not Spared) (REP 11.70-171) 121K44650 Diverter solenoid (SOL11-085) (REP 11.74-171) 050E23180 Diverter gate Parts Lists May 2013 PL 11.197 5-122 Xerox® WorkCentre® 5790 Family...
  • Page 124 604K41660 OCT (complete) – Tray (P/O PL 12.10 Item 1) 675K26824 OCT finger kit (REP 12.1) – Thumbscrew (P/O PL 12.10 Item 1) 130E81311 OCT 90% full sensor (Q12-300) Parts Lists May 2013 PL 12.10 Xerox® WorkCentre® 5790 Family 5-123...

  • Page 125: Pl 14.10 Scanner Module, Cvt/Document Glass (W/Tag 150)

    (P/O PL 14.10 Item 1) – Transit screw hole plug (P/O PL 14.10 Item 3) – Scanner frame securing bracket (Not Spared) NOTE: Refer to ADJ 14.2 for the optics cleaning procedure. Parts Lists May 2013 PL 14.10 5-124 Xerox® WorkCentre® 5790 Family...

  • Page 126: Pl 14.15 Electrical Components (W/Tag 150)

    Spared) (W/O TAG 157) 013E43880 Bearing (REP 14.16) – Intermediate pulley (REP 14.16) – Intermediate pulley bracket (REP 14.16) NOTE: Refer to ADJ 14.2 for the optics cleaning procedure. Parts Lists May 2013 PL 14.15 Xerox® WorkCentre® 5790 Family 5-125...

  • Page 127: Pl 14.20 Scanner Module, Cvt/Document Glass (W/O Tag 150)

    016E18310 Top cover plug – Base cover plug (Not Spared) 032E20580 Rubber stop 032K04061 CVT Ramp assembly (REP 14.6) NOTE: Refer to ADJ 14.1 for the optics cleaning procedure. Parts Lists May 2013 PL 14.20 5-126 Xerox® WorkCentre® 5790 Family...

  • Page 128: Pl 14.25 Electrical Components (W/O Tag 150)

    Actuator support (Not Spared) – CCD PWB/Scanner PWB harness (P/O PL 14.20 Item 1) – Scan cable (Not Spared) (REP 14.12) NOTE: Refer to ADJ 14.1 for the optics cleaning procedure. Parts Lists May 2013 PL 14.25 Xerox® WorkCentre® 5790 Family 5-127...

  • Page 129: Pl 17.00 Secure Access Additions

    PL 17.00 Secure Access Additions Item Part Description 101E28760 Secure access controller 105E24030 Xerox secure access power supply 146E02180 Xerox secure access card reader (HID) – Xerox secure access card reader (MAGSTRIPE) (Not Spared) 146E02190 Xerox secure access card reader...

  • Page 130: Pl 20.10 Fax Pwbs

    Sweden – – Switzerland – Line 1 fax kit (REF: PL 31.35 Item 1) (W/TAG X-001) – Line 2 fax kit (REF: PL 31.40 Item 1) (W/O TAG X-001) Parts Lists May 2013 PL 20.10 Xerox® WorkCentre® 5790 Family 5-129...
  • Page 131 3 x 5000 staples) – Convenience stapler (P/O PL 25.10 Item 1) (XE) – – Convenience stapler (USSG/XCL) (P/O PL 25.10 Item 1) NOTE: The convenience stapler has no serviceable parts. Parts Lists May 2013 PL 25.10 5-130 Xerox® WorkCentre® 5790 Family...
  • Page 132 Compiler carriage support (Not Spared) 108R00682 1K LCSS staple cartridge – 1K LCSS staple refill (pack of 40) WARNING Wear protective gloves, PL 26.10 Item 10 when using solvents and cleaning agents Parts Lists May 2013 PL 26.10 Xerox® WorkCentre® 5790 Family 5-131...

  • Page 133: Pl 26.11 Consumables And Tools (2 Of 2)

    Convenience stapler cartridge refill (staples only - 3 x 5000 staples) – Handset tool (Not Spared) 600T02329 PFP stack height sensor & retard shield setting tool 600T02331 LVPS test tool Parts Lists May 2013 PL 26.11 5-132 Xerox® WorkCentre® 5790 Family...

  • Page 134: Pl 28.10 Covers

    (REF: PL 14.20) – HVF covers (REF: PL 11.130) – Not used – Tray 5 covers (REF: PL 7.60) – Inserter covers (REF: PL 11.175) – Tri-folder covers (REF: PL 11.190) Parts Lists May 2013 PL 28.10 Xerox® WorkCentre® 5790 Family 5-133...

  • Page 135: Pl 31.10 Maintenance/Installation/Removal Kits (1 Of 5)

    Lever arm CRU spares kit (REF: PL 5.17 Item 28) (W/TAG D-001) NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are for reference only. Parts Lists May 2013 PL 31.10 5-134 Xerox® WorkCentre® 5790 Family...

  • Page 136: Pl 31.11 Maintenance/Installation/Removal Kits (2 Of 5)

    Description 497K05240 Colour scanning enablement kit 498K08260 Convenience stapler kit (XE) – 498K08250 Convenience stapler (USSG/XCL) 498K16091 Xerox copier assistant (XE) – 498K13736 Xerox copier assistant (USSG/XCL) 604K73360 Short paper path kit (W/O fan) (W/ TAG 114) – 604K73040 Short paper path kit with fan (W/O...

  • Page 137: Pl 31.12 Maintenance/Installation/Removal Kits (3 Of 5)

    PL 10.12 Item 24) (W/TAG 004) NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are for reference only. Parts Lists May 2013 PL 31.12 5-136 Xerox® WorkCentre® 5790 Family...

  • Page 138: Pl 31.13 Maintenance/Installation/Removal Kits (4 Of 5)

    – Replacement HDD kit (Not Spared) NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are for reference only. Parts Lists May 2013 PL 31.13 Xerox® WorkCentre® 5790 Family 5-137...

  • Page 139: Pl 31.14 Maintenance/Installation/Removal Kits (5 Of 5)

    604K89850 Tray 3 sensor spares kit NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are for reference only. Parts Lists May 2013 PL 31.14 5-138 Xerox® WorkCentre® 5790 Family...

  • Page 140: Pl 31.35 Line 1 Fax Kits

    – 497K05661 – 497K11270 Brazil (USSG/XCL) NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are for reference only. Parts Lists May 2013 PL 31.35 Xerox® WorkCentre® 5790 Family 5-139...

  • Page 141: Pl 31.40 Line 2 Fax Kits

    South Africa – 497K05691 USSG/XCL – 497K05681 NOTE: 497/8K part numbers should not be ordered by the CSE. 497/8K part numbers are customer install kits and are for reference only. Parts Lists May 2013 PL 31.40 5-140 Xerox® WorkCentre® 5790 Family...

  • Page 142: Common Hardware

    Screw M4x10 Self Tapping – Screw M3x5.5 Machine – Screw M3x5 Machine – Screw M3x9 Self Tapping – E-Clip M3.5 – Nut M3 – Screw M3x5.5 Taptite – Nut M3 Parts Lists May 2013 Common Hardware Xerox® WorkCentre® 5790 Family 5-141...
  • Page 143 013E25790 Nylon bearing 013E25800 6mm x 10mm x 13mm bush (bronze) – M4 x 5.5 Screw/Machine/Pozi/Wash Hd Brass 658W28660 M3x16 Screw/Machine/Pozi/Pan Hd – KL Clip M4 354W21251 E-clip M3 Parts Lists May 2013 Common Hardware 5-142 Xerox® WorkCentre® 5790 Family...

Table of Contents