Ipsec; Enabling Ipsec; Managing Actions - Xerox ColorQube 9301 System Administrator Manual

IPsec

Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions.
You can control IP communication on the printer for the following:
 DHCP v4/v6 (TCP and UDP)
 DNS (TCP and UDP)
 FTP (TCP)
 HTTP (Scan Out, TCP port 80)
 HTTPS (Scan Out, TCP port 443)
 HTTPS (Web Server, TCP port 443)
 ICMP v4/v6
 IPP (TCP port 631)

Enabling IPsec

Before you begin:
Ensure that Secure HTTP (SSL) is enabled.
1. In CentreWare Internet Services, click Properties > Security.
Click IPsec.
2.
3. Under Enablement, select Enabled.
4. Click Apply to save the new settings or Undo to retain the previous settings.

Managing Actions

Use actions to more specifically manage how IPsec controls dependent protocols.
Creating a New Action
Click Actions at the top of the IPsec page.
1.
2. Click Add New Action.
3. On the Step 1 of 2 page, under IP Action Details, type in the Name. This field is required.
4. In the Description field, type a description for the action, if desired.
5. Under Keying Method, select Manual Keying or Internet Key Exchange (IKE).
Note: Select Manual Keying if client devices are not configured for or do not support IKE.
If you selected IKE, under Pre-shared Key Passphrase, type the passphrase, then click Next.
6.
 LPR Print (TCP port 515)
 Port 9100 Print (TCP port 9100)
 SMTP (TCP/UDP port 25)
 SNMP (TCP/UDP port 161)
 SNMP Traps (TCP/UDP port 162)
 WS-Discovery (UDP port 3702)
 Up to 10 additional services
ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Security
81