Ipsec; Enabling Ipsec; Disabling Ipsec At The Control Panel; Managing Actions - Xerox WorkCentre 7800 Series System Administrator Manual

IPsec

Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions.
You can control IP communication on the printer for the following:
• DHCP v4/v6 (TCP and UDP)
• DNS (TCP and UDP)
• FTP (TCP)
• HTTP (Scan Out, TCP port 80)
• HTTPS (Scan Out, TCP port 443)
• HTTPS (Web Server, TCP port 443)
• ICMP v4/v6
• IPP (TCP port 631)

Enabling IPsec

1. In CentreWare Internet Services, click Properties > Security.
Click IPsec.
2.
3. Under Enablement, select Enabled.
Click Apply to save the new settings or Undo to retain the previous settings.
4.

Disabling IPsec at the Control Panel

At the printer control panel, press the Machine Status button, then touch the Tools tab.
1.
2. Touch Security Settings > IPsec.
Touch Disable IPsec.
3.
Note: IPsec can be enabled in CentreWare Internet Services only.

Managing Actions

Use actions to more specifically manage how IPsec controls dependent protocols.
• LPR Print (TCP port 515)
• Port 9100 Print (TCP port 9100)
• SMTP (TCP/UDP port 25)
• SNMP (TCP/UDP port 161)
• SNMP Traps (TCP/UDP port 162)
• WS-Discovery (UDP port 3702)
• Up to 10 additional services
WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Security
97