Troubleshooting - SMC Networks PSE200 Operation Manual

Troubleshooting

○Troubleshooting
Applicable pressure switch: PSE200
If a cause applicable to the failure cannot be identified and normal operation can be recovered by
replacement with a new Pressure switch, this indicates that the Pressure switch itself was broken. The
Pressure switch breakage can be caused by operating environment (network construction, etc.), and so
consult with SMC separately to obtain countermeasures.
The pressure
switch does not
operate normally
Yes
No
The switch output is on
The switch output is off
The switch output
generates chattering
Slow switch output
response
The indication light
works improperly
An error signal comes on
-29-
The indication light is on
The indication light is off
The indication light is on
The indication light is off
The indication light
is on or off
Refer to reference
No.1
The product is
broken
Refer to reference
No.2
The product is
broken
Refer to reference
No.1
Refer to reference
No.3
Refer to reference
No.4
Refer to reference
No.5
The product is
broken
The product is
broken
Refer to reference
No.6
No.PS##-OMH0006-C