Setting Of Function - SMC Networks PSE200 Operation Manual

Setting of Function

○Setting procedures
Detects pressure, displays values and performs switching.
Other functions such as zero clear can also be set if necessary.
For connecting at
least 1 sensor other
PSE530 series.
Automatic identification
function release
Selection of Pressure range, Output style, Response time and Pressure setting method.
Selection or setting of Fine adjustment function of displayed value, Copy function, Auto-shift
○Automatic identification function release
(When at least 1 sensor other than PSE530 series will be connected.)
•Press the
and
•Press the
button to display [CPy].
•Press the
button to display [SH1],
and then press the
•If [Aon] is displayed, press the
to display [AoF], and then press the
∗: Setting for the automatic identification function is ON when default setting.
Measurement mode
▼
▼
Initial setting
Pressure Setting
Input of set value for pressure to perform switch output.
Setting of Special Function
function and Automatic identification function.
Measurement mode
buttons are pressed simultaneously for 2 seconds or longer to display [FSt].
button again.
or
button.
▼
▼
▼
button
-18-
For connecting only
▼
PSE530 series.
No.PS##-OMH0006-C