Reating The Serial /Model Number Label; Equipment (Printer); Software - Respironics DreamStation Service & Technical Reference Manual

P 6-26
AGE
6.2 C
REATING THE
In the case that the Bottom Enclosure of the PAP device or Bottom Cover of the Humidifier is replaced during
service, or if there is damage to the labels, all information on the serial/model number labels is required to be
duplicated in order to maintain proper traceability. Refer below for details on reprinting the labels.
The new label MUST include the same Model Number, Serial Number and
Model Name
Model Number
Serial Number
6.2.1 E (P
QUIPMENT
Recommended Equipment:
Zebra GX430T or similar
Printer Specifications:
· Label printer
· Monochrome
· Direct thermal/thermal transfer
· Roll (4.25 in)
· 300 dpi
· up to 240.9 inch/min
· USB
· LAN
· serial
6.2.2 S
OFTWARE
Recommended Software:
Loftware Software and Print Key (Fees Apply)
•
For a full detailed list of Loftware supported printers and fees, please refer to http://www.loft-
ware.com/support/tech_printers.cfm
•
For software support, visit their website at www.loftware.com
S /M
ERIAL ODEL
UDI number as those of which are on the original label.
Manufacturing Date
F
IGURE
)
RINTER
N L
UMBER ABEL
NOTE
Revision Number
6-36: E L
XAMPLE ABEL
1117539, V
UDI Number (Unique Device Identifier)
Serial Number
. 07
ER