Respironics DreamStation Service & Technical Reference Manual page 40

1117539, V . 07
ER
I
CON
AHI
cmH O
2
T
EXT
Show You can select whether or not the Apnea/Hypopnea index,
AHI/Fit/PB Mask Fit averages, and Periodic Breathing averages are
displayed on the Patient Info screens.
Pressure Units If enabled on the device, you will have the option to choose
the units of pressure that are displayed. You can choose
between "cm H2O" or "hPa".
Automatic On You can enable or disable this feature if you want the device
to automatically turn the airflow on whenever the patient
applies the interface (mask) to their airway.
Automatic Off You can enable or disable this feature if you want the device
to automatically turn the airflow off whenever the patient
removes the interface (mask) from their airway.
Language This feature allows you to choose which language to display
on the interface. You can choose English or Spanish.
Clear Default This setting turns off the default patient reminders that are
Reminders enabled in the therapy device from the factory.
Note: This does not turn off additional reminders that you
may have activated in Encore. Encore messages must be
cleared or modified in Encore.
Reset Data Use the Reset Data function to clear patient data from the
therapy device, as well as an SD card and modem (if
installed). After you click to execute Reset Data, the device
will display a message asking you to confirm the reset. Click
again to reset data in the device.
Note: Reset Data resets Blower Hours that are visible to the
patient, but it does not reset Machine Hours in the Provider
Menu.
D
ESCRIPTION
P 4-25
AGE