Respironics DreamStation Service & Technical Reference Manual page 36

1117539, V . 07
ER
Comfort Settings:
Choosing this screen will take you to a sub-menu where you can adjust the humidification and pressure
comfort settings. These settings are described here.
Note: Not all settings shown here will display on the device. The display will vary based on therapy device
model and device settings.
I
CON
F 4-22: S
IGURE
T
EXT
Humidification This setting allows you to select the Humidification Mode
being used. You can choose between Fixed or Adaptive (A)
Humidification. If a heated tube is attached to the device, then
the device will automatically switch to Heated Tube
Humidification Mode.
Fixed mode applies a constant heat on the humidifier heater
plate. Under certain conditions and settings, this mode can
allow condensation to occur in the tube.
Adaptive mode adapts the heater plate temperature to the
ambient conditions in the room, and is designed to not allow
condensation to occur in the tube.
Humidifier This setting allows you to choose the desired humidity setting
for the humidifier: 0, 1, 2, 3, 4 or 5.
Tube This setting allows you to choose the desired temperature for
Temperature the heated tube: 0, 1, 2, 3, 4 or 5.
C S -M
AMPLE OMFORT UB
D
ESCRIPTION
ENU
P 4-21
AGE