Replacing The Water Tank Assembly - Respironics DreamStation Service & Technical Reference Manual

P 7-2
AGE
7.1 R
EPLACEMENT
Prior to executing repair and replacement procedures, device troubleshooting must be performed. Refer to
Chapter 5 for troubleshooting procedures.
7.1.1 R
EPLACING THE
Kit
Tank Assembly
T W
O REMOVE THE ATER
1. Pull back on the latch located on the Bottom Assembly and lift up the Flip Lid.
2. Pull the Water Tank Assembly out of the Humidifier.
T I W
O NSTALL THE ATER
1. Position the Water Tank back into the Humidifier as shown in Figure 7-1.
2. Close the Flip Lid and verify it latches into place.
I
NSTRUCTIONS
W T A
ATER ANK SSEMBLY
Included in Kit
•
Tank Assembly
C A
HAMBER SSEMBLY
Pull back on latch
Tank Assembly
F 7-1: W
IGURE
T A :
ANK SSEMBLY
:
C A
ATER HAMBER SSEMBLY
1117539, V
Tools Required
•
None
. 07
ER