Chapter 4: Setup; Supplying Dc Power To The Device - Respironics DreamStation Service & Technical Reference Manual

1117539, V . 07
ER
C 4: S
HAPTER
This chapter provides an overview of the system setup including introductory information on the User and
Provider modes and menus. Please refer to the device's User Manual for further information.
•
Please refer to the Clinical Manual for additional information.
4.0 S DC P
UPPLYING
A Philips Respironics DC power cord can be used to operate this device in a stationary recreational vehicle,
boat, or motor home. In addition, a Philips Respironics DC battery adapter cable, when used with a DC power
cord, allows the device to be operated from a 12 VDC free-standing battery.
•
Always ensure that the DC power cord securely fits into the therapy device prior to use.
•
When DC power is obtained from a vehicle battery, the device should not be used while the
vehicle's engine is running. Damage to the device may occur.
•
Only use a Philips Respironics DC Power Cord and Battery Adapter Cable. Use of any
other system may cause damage to the device.
ETUP
•
Inspect the power cord often for any signs of damage.
Replace a damaged power cord immediately.
•
Be sure to route the power cord to the outlet in a way that
will prevent the cord from being tripped over or interfered
with by chairs or other furniture.
•
This device is activated when the power cord is connected.
•
If the device has been exposed to either very hot or very
cold temperatures, allow it to adjust to room temperature
(approximately two hours) before beginning setup.
•
Do not use extension cords with this device.
OWER TO THE
WARNING
CAUTION
NOTE
D
EVICE
CAUTION
P 4-1
AGE