Respironics DreamStation Service & Technical Reference Manual page 95

P 6-22
AGE
6.1.9 R
EPLACING THE
Kit
Blower Outlet Seal
Blower Isolators, SK
or
Blower Isolators, Moog
T B
O REMOVE THE LOWER
1. Remove all components as instructed in the previous sections.
2. Pull the Blower Outlet Seal and Blower Isolators off of the Blower.
L
Blower Outlet Seal
T B
O INSTALL THE LOWER
1. Position the Blower Outlet Seal and Blower Isolators on the Blower and verify they are fully seated.
2. Assemble the remainder of the device as instructed in the previous sections.
I
SOLATORS
The Isolators are prone to falling off the Blower. Ensure they are fully seated and stay
fully seated during installation and throughout the remainder of the repair process.
B O
LOWER UTLET
Included in Kit
•
Blower Outlet Seal
•
Blower Isolators
O S B
UTLET EAL AND LOWER
Blower Isolators,
SK (Blue)
F 6-29: B
IGURE LOWER
O S B
UTLET EAL AND LOWER
, SK - GOOD
F 6-30: I
IGURE
S B
EAL AND LOWER
I :
SOLATORS
Blower Isolators,
Moog (Gray)
O S /B
UTLET EAL LOWER
I :
SOLATORS
I
SOLATORS
A
SOLATOR LIGNMENT
CAUTION
1117539, V
I
SOLATORS
Tools Required
•
Torx Screwdriver (T10 is
recommended)
I
SOLATORS
, M - GOOD
OOG
. 07
ER