Replacing The Flow And Pressure Sensor Seals - Respironics DreamStation Service & Technical Reference Manual

1117539, V . 07
ER
6.1.6 R
EPLACING THE
Kit
Flower Sensor Seal
Pressure Sensor Seal
T S
O INSTALL THE EALS
1. Remove all components as instructed in the previous sections.
2. Lift the Seals away from the Blower Box Assembly.
N
: The Pressure Sensor Seal may remain attached to the Pressure Sensor on the PCA. Remove it from
OTE
the PCA if this is the case.
T S
O INSTALL THE EALS
1. Align the Seals into the Blower Box Assembly grooves. Ensure the seals are flush against the
Blower Box Assembly.
2. Assemble the remainder of the device as instructed in the previous sections.
F P
LOW AND RESSURE
•
Flower Sensor Seal
•
Pressure Sensor Sea
:
F 6-11: F
IGURE LOW AND
:
S S
ENSOR EALS
Included in Kit
Pressure Sensor Seal
P S
RESSURE ENSOR
Tools Required
•
Torx Screwdriver (T10 is
recommended)
Flow Sensor Seal
S
EALS
P 6-11
AGE