Maintaining Mld - Zte ZXR10 5900E Configuration Manual

ZXR10 5900E Series Configuration Guide (IPv6)
Parameter
<seconds>
For a description of the parameters in Step 3, refer to the following table:
Parameter
<seconds>
For a description of the parameters in Step 4, refer to the following table:
Parameter
<seconds>
For a description of the parameters in Step 5, refer to the following table:
Parameter
<times>

12.3 Maintaining MLD

To maintain MLD, run the following commands:
Command
show ipv6 mld interface [<interface-name>]
ZXR10#
show ipv6 mld groups{[<interface-name >], [<group-address
ZXR10#
>]}[detail ]
show ipv6 mld packet-count [<interface-name>]
ZXR10#
clear ipv6 mld groups [<interface-name>]
ZXR10#
clear ipv6 mld packet-count[<interface-name>]
ZXR10#
For a description of the parameters, refer to the following table:
SJ-20150114102049-011|2015-01-15 (R1.0)
Description
Time value, in the range of 1-25, in the unit of second, with
the default value of 10.
Description
Querier timeout period, in the range of 60-300, in the unit of
second, with the default value of 255.
Description
Query interval, in the range of 1-25, in the unit of second, with
the default value of 1.
Description
Robust variable. Range: 2–7, default: 2.
12-6
ZTE Proprietary and Confidential
Function
Shows MLD configuration on an
interface.
Shows MLD group join information
on an interface.
Shows statistics counts of MLD
protocol messages sent and
received.
Clears multicast groups that are
joined dynamically.
Clears statistics counts of MLD
protocol messages sent and
received.