Ipv6 Mixed-Acl Maintenance And Diagnosis - Zte ZXR10 5900E Configuration Manual

Tip:
If the IPv6-MIXED-ACL is bound on the VLAN, and the bound VLAN is inconsistent with
the out-vlan in the rule, the bound VLAN is used as the out-vlan.

4.3 IPv6 mixed-ACL Maintenance and Diagnosis

IPv6 ACL Maintenance and Diagnosis
To maintain and diagnose IPv6 ACLs, use the following commands.
Command
ZXR10(config)#
cl-name>[{from<value>|to <value>}]|[ brief [name
<acl-name>]|[config]}[|{begin|exclude|include}]
ZXR10(config)#
<acl-name>|by-direction {ingress | egress}|by-interface-or-vlan
<interface-name or vlan- id>by-interface <interface-name>}]
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
[<interface-name>]
The command parameters are described as follows.
Command
<acl-name>
ingress/egress
<interface-name>
[<interface-name>]
SJ-20150114102049-011|2015-01-15 (R1.0)
show ipv6-access-lists [{name <a
show ipv6-access-groups [{by-access-list
show running-config ipv6-acl
show running-config port-acl
show running-config-interface port-acl
Function
Shows IPv6 ACL information by the specified ACL name.
Shows ACL information by the ingress or egress.
Shows ACL information by the interface name.
Shows the ACL (IPv4 and IPv6) binding information related
to a certain interface.
4-7
Chapter 4 IPv6 ACL Configuration
Function
Shows the IPv6 ACL list or brief
information.
Shows the IPv6 ACL binding
information. The information can
be selectively displayed according
to the command parameters.
Shows the entire IPv6 ACL
information.
Shows all the IPv6 ACL binding
information (and the IPv4 ACL
binding information as well if any
IPv4 ACL is bound).
Shows the IPv6 ACL binding
information related to a certain
interface (and the IPv4 ACL
binding information as well if any
IPv4 ACL is bound).
ZTE Proprietary and Confidential