Ipv6 Acl Configuration Example - Zte ZXR10 5900E Configuration Manual

Command
show ipv6-mixed-access-lists name<acl-name>[{from<valu
ZXR10#
e>|to <value>}|{begin|exclude|include}]
show ipv6-mixed-access-lists brief {name<acl-name>|[|{beg
ZXR10#
in|exclude|include}]}
show ipv6-mixed-access-lists |{begin|exclude|include}
ZXR10#
show ipv6-mixed-access-lists config [{begin|exclude|inclu
ZXR10#
de}]
show ipv6-mixed-access-groups[{by-access-list
ZXR10#
<acl-name>|by-direction {ingress | egress}|by-interface
<interface-name>}]
Command parameters are describes as follows:
Parameter
<acl-name>
ingress | egress
<interface-name>
[<interface-name>]

4.4 IPv6 ACL Configuration Example

General Description
In the network as shown in
through S2 to S1. S1 expects to receive the login requests of PC1 only but not the login
requests of PC2. Then an ACL can be bound to the ingress direction of the interface
gei-0/1/1/3 to filter out the telnet packets from PC2 (or the ACL may be bound to the egress
direction of the interface gei-0/1/1/4).
SJ-20150114102049-011|2015-01-15 (R1.0)
Function
Shows IPv6 MIXED ACLinformation by the specified ACL
name.
Shows ACL information by the ingress or egress.
Shows ACL information by the interface name.
Shows the ACL (IPv4 and IPv6) binding information related
to a certain interface.
Figure 4-1, suppose both PC1 and PC2 send telnet requests
4-9
Chapter 4 IPv6 ACL Configuration
Function
Shows the ACL list.
Shows the brief information.
Shows the ACL list
Shows the ACL configured in the
system database.
hows the ACL binding information.
ZTE Proprietary and Confidential