Ipv6 Pim-Ssm Maintenance And Diagnosis - Zte ZXR10 5900E Configuration Manual

ZXR10 5900E Series Configuration Guide (IPv6)

14.3 IPv6 PIM-SSM Maintenance and Diagnosis

Users can view the (S, G) routes of group addresses set by the SSM range. Other
addresses only generate (*, G) routes.
ZXR10 5900E provides the following command to maintain IPv6 PIM-SSM:
Command
show ipv6 pim mroute [group <group-address>][source
ZXR10#
<source-address>]
The command parameters are described as follows.
Parameter
group <group-address>
source <source-address>
The following example shows the outputs of the show ipv6 pim mroute command:
ZXR10(config-mld-if)#static-group FF38::2 source 2009::8
ZXR10(config-mld-if)#exit
ZXR10(config-mld-ipv6)#exit
ZXR10(config-mcast-ipv6)#router pimsm
ZXR10(config-pimsm-ipv6)#inerface loopback1
ZXR10(config-pimsm-ipv6-if)#pimsm
ZXR10(config-pimsm-ipv6-if)#exit
ZXR10(config-pimsm-ipv6)#show ipv6 pimsm mroute
IPv6 PIM-SM Multicast Routing Table
Flags: T- SPT-bit set,A- Foward,J- Join SPT,U- Upsend ,
Macro state: Ind- Pim Include Macro,Exd- Pim Exclude Macro,
Jns- Pim Joins Macro,LAst- Pim Lost_assert Macro,
Imo- Pim Immediate_olist Macro,Ino- Pim Inherited_olist Macro,
Lcd- Pim Local_receiver_include Macro
Timers:Uptime/Expires(Upstream State)
(2009::8, ff38::2), 00:00:07/00:00:00(JOINED)/00:00:00,
Reg:NO INFO; RP:0::0; RT:NULL;
Ind:1/Exd:0/Jns:0/LAst:0/Imo:1/Ino:1
Iif:NULL; RPF nbr:0.0.0.0;
Oif:
loopback1,
SJ-20150114102049-011|2015-01-15 (R1.0)
Description
Multicast group address, in the X:X::X:X format
Source address, in the X:X::X:X format
LocalInSG/InoSG
14-2
Function
Shows IPv6 PIM-SM routing table.
ZTE Proprietary and Confidential