Chapter 13 Ipv6 Pim-Sm Configuration; Configuring Ipv6 Pim-Sm - Zte ZXR10 5900E Configuration Manual

of the multicast route entities. The Join message and the Prune message are in the
same packet. Either message can be null.
l
Bootstrap message: A route needs to send Bootstrap messages on all interfaces
except the interface on which the Bootstrap message is received. This message is
generated on the BSR and forwarded by all switches.
l
Assert message: When there are several switches on a multi-access network and a
multicast group packet is received on an egress interface of a switch, it is necessary
to use the Assert message to designate a forwarder.
l
Candidate-RP-Advertisement:
Candidate-RP-Advertisement to the BSR periodically to advertise the set of group
addresses served by the Candidate RP.

13.2 Configuring IPv6 PIM-SM

To configure IPv6 PIM-SM on ZXR10 5900E, perform the following steps.
Step
1
2
SJ-20150114102049-011|2015-01-15 (R1.0)
Command
ZXR10(config-mcast-ipv6)#
ZXR10(config-mcast-ipv6)#
ZXR10(config-mcast-ipv6-pim)#
riority <priority>]
ZXR10(config-mcast-ipv6-pim)#
>[priority<priority>]
ZXR10(config-mcast-ipv6-pim)#
<ip-address>[priority <priority>]
ZXR10(config-mcast-ipv6-pim)#
<ip-address>[priority <priority>]
ZXR10(config-mcast-ipv6-pim)#
ZXR10(config-mcast-ipv6-pim)#
access-list-name >
ZXR10(config-mcast-ipv6-pim)#
ZXR10(config-mcast-ipv6-pim)#
<access-list-name>
ZXR10(config-mcast-ipv6-pim)#

Chapter 13 IPv6 PIM-SM Configuration

A candidate
router pim
no router pim
static-rp<ip-address>[p
no static-rp<ip-address
rp-candidate
rp-candidate
spt-threshold infinity
accept-register<
no accept-register
accept-rp
no accept-rp
13-3
ZTE Proprietary and Confidential
RP unicasts
Function
Enables IPv6 PIM-SM.
Disables PIM-SM.
Configures a static RP.
Deletes a static RP.
Configures a candidate BSR.
Configures a candidate RP.
Configures handover of the
SPT.
Filters the multicast packets
encapsulated in Register
messages.
Disables to filter the packets
encapsulated in Register
messages.
Filters the candidate RP
addresses advertised in the
Bootstrap messages.
Disables to filter the candidate
RP addresses.