Ipv6 Pim-Sm Maintenance And Diagnosis - Zte ZXR10 5900E Configuration Manual

Parameter
<access-list-name>

13.3 IPv6 PIM-SM Maintenance and Diagnosis

The ZXR10 5900E provides the following commands to maintain IPv6 PIM-SM:
Command
ZXR10(config)#
<group-address>][source <source-address>]
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
show ipv6 pim traffic [<interface-name>]
ZXR10#
clear ipv6 pim traffic
ZXR10#
The command parameters are described as follows.
Parameter
group <group-address>
source <source-address>
<interface-name>
SJ-20150114102049-011|2015-01-15 (R1.0)
Description
Defines a group range in which the candidate RPs advertised
in BSR messages received are filtered.
show ipv6 pim mroute [group
show ipv6 mroute summary
show ipv6 pim bsr
show ipv6 pim rp mapping
show ipv6 pim rp hash <group-address>
show ipv6 pim interface [<interface-name>]
show ipv6 pim neighbor [<interface-name>]
show ipv6 pim nexthop
Description
Multicast group address, in the X:X::X:X format
Source address, in the X:X::X:X format
Interface name
13-9
Chapter 13 IPv6 PIM-SM Configuration
Function
Displays the IPv6 PIM-SM routing
table.
Displays the routing table
information of the IPv6 broadcast
PIM-SM.
Displays the information of the
BSR.
Displays the RP mapping
information advertised by the
BSR.
Displays the RP information
selected by a specific multicast
group.
Displays the interface on which
IPv6 PIM-SM is configured.
Displays the neighbor information
of a PIM-SM interface.
Displays the PIM-SM next hop
information.
Displays the IPv6 PIM-SM traffic
statistics information.
Clears the IPv6 PIM-SM traffic
statistics information.
ZTE Proprietary and Confidential