Starting The Machine - Expobar QUARTZ ONE TOUCH User Manual

INSTALLATION AND START-UP

Starting the machine

A
Fill the water tank to the max level (A).
If the machine is connected to the domestic water supply, water filling will begin automatically.
Connect the machine's plug to the electrical outlet (this should be done by a qualified person).
Turn on the main power switch (B).
When the machine is switched on, it may automatically go into STANDBY mode. To determine if
the machine is in STANDBY mode, confirm if the OK and Cappuccino
simultaneously. If this is the case, the machine must be changed to ON mode.
To change to ON mode, simply press the OK and Cappuccino
When the machine is in ON mode, five of the buttons will light up and the one remaining unlit button
will begin to cycle. The display will show PREHEATING XXX
temperature (C).
When all the drink buttons are lit continuously (none flashing) the machine is ready for use.
The display will show the water temperature, time, (D) and EXPOBAR QUARTZ ONE TOUCH (E).
118 C
o
ENJOY YOUR DRINK
Note:
i
Keypad functions and explanations are found on page 27.
PREHEATING
C
o
XXX
07:53
D
B
buttons are flashing
buttons simultaneously.
C until the boiler reaches operating
o
C
EXPOBAR
QUARTZ ONE TOUCH
QUARTZ ONE TOUCH
E
13
R