Support For Liebert Sn Sensors - Emerson Liebert Intellislot Unity Card User Manual

Modbus TCP and Modbus RTU Support
The Liebert IntelliSlot Unity card supports Modbus TCP and Modbus RTU for the full range of information
available from the managed device. The Modbus protocol mapping document, SL-28170, is available at
Liebert's Web site:
BACnet IP and BACnet MSTP Support
The Liebert IntelliSlot Unity card supports BACnet IP
and BACnet MSTP for the full range of information
available from the managed device. The BACnet
protocol support in the IS_UNITY 6.0 release has
been tested by the BACnet Testing Laboratories
(BTL) and was found in conformance to the BACnet
protocol standards. The BTLCertification listing for the Unity card on the BACnet International website can
be found here. The BACnet protocol mapping document, SL-28170, and the BACnet Protocol
Implementation Conformance Statement (PICS), SL-52647, are available at Liebert's Web site
(www.liebert.com) as guides to implementing the BACnet protocol.
YDN23 Support
The Liebert IntelliSlot Unity card supports YD/T-1363 specification for the full range of information available
from managed Liebert NXL
Trellis Support
™
The Liebert IntelliSlot Unity-DP card communicates a rich set of Emerson Protocol information to the Trellis
DCIM platform.
Trellis can manage and control Liebert equipment using SNMP, Modbus or the Emerson Protocol. This
allows monitoring all Liebert equipment using Liebert IntelliSlot Web, Liebert IntelliSlot 485, Liebert
IntelliSlot IPBML, Liebert IntelliSlot Web ADPT or Liebert IntelliSlot Unity platform communication
interfaces.
Liebert Nform
Utilizing the Emerson Protocol or SNMP and Web technologies built into each Liebert IntelliSlot Unity card,
Liebert Nform will centrally manage alarm notifications to provide an easy interface to access critical
equipment information.
A downloadable version is available online at:
Liebert MultiLink
The Liebert IntelliSlot Unity card integrates with Liebert's MultiLink software to provide unattended,
graceful operating system shutdown of PCs, servers and workstations. The card can be monitored by
Liebert MultiLink over the network, eliminating the need for serial cables.
For more information on Liebert MultiLink and a downloadable version of Liebert MultiLink software, visit
multilink.liebert.com

1.3 Support for Liebert SN Sensors

The Liebert IntelliSlot Unity card supports connection and monitoring up to 10 Liebert SN modular and
integrated sensors. Available sensor types include temperature, humidity, door closure, contact closure
and leak detection. Sensor tab menus permit configuring sensors and putting them in order for easier
checking of high-priority conditions.
www.liebert.com
™ or Liebert PeX
Support
®
Support
®
™ units.
nform.liebert.com
5 Liebert
™
® ™
IntelliSlot Unity Card User Manual
Introduction